Showing results for "broyhill bed frame replacement parts"

Made from recycled railroad steel, these support trails provide an alternative to traditional wooden slats. Three metal rails and three legs complete this set, though additional slats can be used, depending on your preference. An adjustable support system and height make this piece adaptable to your style of bed frame. Plus, they’re foldable for easy storage. This item does not include side rails or a headboard. A box spring is required.

• : 21lb.
• : 3 metal support rails, 3 legs
• : 6'' H x 78'' W x 1.25'' L
• : No tools required
• : Yes

A heavy-duty bed frame that will fit Queen bolt-on style headboards & footboards. You must have a headboard and footboard to use this frame. This frame requires a box spring or foundation. The queen-sized frame will have five (5) legs with the included center bar. The center bar for this frame is used side-to-side for queen bedding. This means this frame is not recommended for use with a split (2 pieces) box spring. The legs will adjust the frame height from 5 3/4" to 9 1/4" off the floor. The steel in this frame is a high strength, high carbon, hot-rolled steel. It is rolled using 97% recycled material producing a very strong and environmentally-friendly product. This frame utilizes a bolt-together assembly, which allows it to be adjusted to accommodate a wider variety of headboards and footboards. The frame simply bolts together through slots and holes in the rails with the provided hardware and tools at the correct width for the bedding being used. The brackets for the headboard and footboard can be quickly mounted to the frame using the provided tools and hardware. This allows for maximum adjustability to ensure that the frame will fit the width and height of your bed perfectly.

• Product Type: Bed Frame
• Material: Steel
• Box Spring Required: Yes
• Clearance - Floor to Bottom: 9''
• : Yes

The heavy-duty wood bunkie board with slats provides an excellent surface foundation for any platform beds, bunkies, and daybeds. It adds support to any mattress type and will keep the mattress stay in good shape thus extending the life of your mattress. The thirteen wooden slats made out of solid wood are linked to prevent movement during use, and they effortlessly extend your mattress's lifespan and prevent sagging. It will give firm bottom support for the mattress. This wood bunkie board is a good alternative instead of a box spring that may be too high for day beds. It will give the bed a lift without adding much height.

• Product Type: Bunkie board/Slats
• Material: Wood
• Weight Capacity: 800lb.

#69 Bolt-On to Down Hook-On Conversion Brackets for Headboard Attachment The #69 Bolt-On to Down Hook-On Bed Frame Conversion Bracket provides vertical and/or width adjustment. This bracket is sold as a set of 2, so if you have a headboard and footboard, you will need two sets. The #69 conversion bracket comes with two #69 brackets, nuts, bolts, and screws. The #69 bracket is used when you need vertical and/or width adjustment for your bed rails to fit your headboard. The hooks on the #69 are pointed down. The #69 bracket should be used when your headboard and/or footboard can take the weight of your bed. The #69 conversion bracket should be the one for you if you need both height and/or width adjustment. Converts a bolt-on bed frame to allow for a hook-on type headboard Allows easy conversion from bolt-on to hook-on brackets This product is sold in pairs. To attach your headboard AND footboard, you would need two pairs Approximate Measurements - Height: 7-3/8", Width: 2-3/8", Depth of Hook: 1-1/4", Overall Bracket Depth: 1-3/8" There are other types of Bolt-On to Hook-On Conversion Brackets with the included hardware: The #35 Hook Plate Conversion Adapter Kit for Using a Bolt-On Frame with a Hook-On Headboard comes as a set of 4, enough for both the headboard and footboard. If you need a straight connection from the bedrail to the headboard and footboard, the #35 should be a perfect fit.

• Converts a bolt-on bed frame to allow for a hook-on type headboard
• Allows easy conversion from bolt-on to hook-on brackets
• This product is sold in pairs. To attach your headboard AND footboard, you would need two pairs

Please note that the images shown on this page are for representation, and the product you receive may differ slightly due to manufacturing changes. Please review the item description and detailed measurements that are provided to ensure these bed rails will work for your application.

• These rails have also been used for "Sleigh" type beds. Please measure the length of your current rails.
• Wood rails are approx. 6 inches tall. An inside lip runs down the inside of each rail, allowing easy and secure attachment of center support systems.

The Hook-On Brackets are double riveted for strength and durability. Sturdy Construction: 1-1/2" x 1-1/2" (vertical) x 12 gauge side rails Made with pride in the U.S.A.These are for Standard Twin and Full size beds, not XL or Extra Long. These rails have also been used for Queen or King size "Sleigh" type beds. Please review all measurements and connections before ordering to ensure these rails will fit your bed. The industry-standard hook plates incorporated into both ends of the rails will most likely fit any headboard/footboard manufactured within the last 40 years. Please measure the distance from the two pins in your headboard/footboard to confirm that they are 2" apart from the center to determine that our rail hook plates will fit appropriately. The price is for a pair of side rails (one for each side of the bed). Rails are sold in pairs only to ensure a correct fit. These are the same original factory rails that are supplied by many bed manufacturers. Please note, however, that the rails shown may not match your rails exactly. Images are for representative photos and do note that the specific rails you receive may differ slightly from the image shown here.bedCLAW Steel Rails Fit Either Twin or Full-Size Beds. Twin/Full angle steel bed side rails are designed to fit either Twin or Full-Size Beds. To use these rails, the pins inside the slot of your headboard and footboard should be 2 inches apart.

Introducing the Instant Mattress Foundation, your ultimate solution for a sturdy and supportive bed base, doubling as a box spring replacement at a fraction of the cost. Designed to accommodate today's higher profile mattresses, this foundation boasts a robust structure that prevents mattress sagging and effortlessly supports heavier bedding. Easily removable, the drawstring cover complements most mattresses, ensuring a seamless aesthetic. Shipping conveniently manageable pieces, assembly is a breeze, with all necessary tools included. But is it a foundation or a box spring? Essentially, they serve as the same purpose, making this high-profile foundation a versatile choice for any mattress type. Crafted from solid spruce in the USA, it caters to those with high bed frames or thicker mattresses, offering easier access and hassle-free delivery, even through narrow spaces. Assembling this foundation is a cinch. Simply unpack, assemble the frame, attach hardware, place the wood slats, and secure the cover with the drawstring. Compatible with various mattress types, including memory foam and latex, this foundation ensures the perfect bed height and stability. To ensure the correct size, measure your mattress's height and combine it with the frame and foundation. Smart packaging minimizes the carbon footprint, delivering the product efficiently to your doorstep, even through tight spaces. Rest assured, the Instant Foundation, promising quality assurance and lasting durability. Experience innovation in specialty sleep products with this versatile and reliable mattress foundation. Elevate your sleep experience with our innovative foundation. Its smart packaging reduces environmental impact while ensuring easy delivery. It's a quality investment in your comfort and convenience. Discover the difference with our specialty sleep products today.

• : 550lb.
• : Box Spring Foundation
• : Wood
• : Yes

This foundation was shipped very quickly. It was packaged nicely. I recommend two or more people to lift. It was VERY heavy. Putting it together was a breeze. Very simple. Probably best for two people though. Also I would HIGHLY recommend an electric drill to screw in the screws. There are many screws you would have to manually turn and screw in. We used our electric drill and it didn't take any time at all. This foundation is the best one I've ever had. It's built better than any of the ones I've ever gotten from a name brand store. It's heavy and not easy to move. Very sturdy. I would recommend this to anyone!. whitney. Arkansas. 2015-01-05 20:03:45

This heavy-duty box spring extends the life of your mattress while providing a solid foundation for restful sleep. Built for lasting support, the steel frame resists sagging and wear, offering reliable structure over time. It's wrapped in a neutral fabric cover, so it blends seamlessly with most bed frames and bedroom aesthetics. Plus, it provides a low-profile foundation for all mattress types. We love how this box spring ensures stability, reduces motion transfer, and supports an even sleep surface – making it a smart, no-fuss addition to any setup.

• Product Type: Box spring
• Material: Metal
• Cover Included: Yes
• Assembly Required: Yes

Anchor your mattress in your master suite or guest room with this low-profile bed frame. Crafted from heavy-duty steel in a powder-coated finish, this bed frame strikes a simple rectangular silhouette. A series of metal slats accommodate your memory foam, latex, or traditional spring mattress (sold separately), while short legs create just enough clearance for convenient under-bed storage. This frame is designed to easily attach to your own standard-sized headboard using predrilled holes in two of the legs.

• Product Type: Bed Frame
• Material: Steel
• Box Spring Required: Yes
• Clearance - Floor to Bottom: 5''
• Number of Bed Frame Legs Included: 6

This set of 4 adjustable-height center support legs for the bed frame is designed to match different beds’ heights to protect your bed and mattress from damage or sagging. Simple and strong unibody construction allows you to add essential support to wooden slats, while a nylon bottom protects the floor from being scratched. The metal leg and glide prove strong, durable, and rust-resistant.

This platform bed brings a refined allure and sophistication to your sleeping space. Made from solid wood, it combines durability with a timeless aesthetic. The bed's clean lines and minimalist profile make it an adaptable piece, suitable for a range of interior styles. Ideal for those seeking a balance of form and function, it also offers ample under-bed storage to help keep your space organized.

• Dimensions: 4" High x 1" Wide - Receiver Size.
• These strong bed rail fasteners are made of cast iron.
• The package contains four plates and four hooks (mounting hardware is not included).
• These slide fasteners are intended to hold the bed frame together.
• Our rail brackets can be used for an old bed restoration or for building a new one.