Showing results for "crown moulding with led"

Orac Decor 991 Crown Moulding contemporary cornice for a multitude of applications. With additional installation support, this profile can flawlessly hide curtain systems. This molding can also be used with LED lights to create the perfect mood lighting. It is made of Purotouch, a high-quality polyurethane resin created in steel molds to replicate plaster and produce crisp edges. Installation is fast and easy. Orac’s moldings can be installed using typical woodworking tools, and the integrated glue grooves guarantee a swift glue application. For best results, use Orac Decor’s Decofix adhesive. In addition, moldings come primed white and ready for paint, glaze, or finish so they can perfectly match your interior. Distributed in the USA exclusively by Outwater Plastics, LLC, and Architecture by Outwater, LLC.

• Product Type: Crown
• Molding Use: Ceiling
• Material: Urethane
• Overall: 4.375'' H x 78'' W
• Projection From Wall: 5.5mm

Moulding looks great. I chose to add backlight. Install was easy. I added a 1“ strip of foam board that o tacked to the wall during install to maintain an even gap to the wall. Material was easy to cut with a miter saw. Also I reduced the bottom of the moulding by 2 inches to by running through a table saw-I would have looked too big on the wall otherwise. I glued the pieces to the ceiling with a glue that is made for foam, held it in place with 8ft floor trim until the glue dried. Final steps were paintable caulk for all small gaps, paint everything with same latex paint I used for the ceiling and glued an LED strip behind.. Andrea. Parker, CO. 2022-01-11 08:17:25

This elegant LED profile offers a beautiful solution to subtly incorporate indirect lighting into a classic interior.

• Product Type: Crown
• Molding Use: Ceiling
• Material: Urethane
• Overall: 2.125'' H x 78.75'' W
• Projection From Wall: 1.625mm

Very happy with the look of this. We laid the light so that the sticky part of the strip was against the far wall of the crown facing towards the wall rather than facing towards the ceiling which made the light have a more soft fall off gradient rather than a hard line fall off. The last two images (the teal and green colors show the difference between the soft and hard fall off look. It’s nice to have a variety of light expression. We did this in our basement theater room and love it. We also got our drop down ceiling from Wayfair and the structure of it looks awesome with the unique lighting emphasizing it.. Gloria Joy. Childersburg, AL. 2022-04-11 22:48:06

Orac’s C353 Cornice Moulding combines contemporary design with smart engineering. This flat crown molding extends across the ceiling, providing an intriguing floating effect between itself and your walls, thanks to its recessed shadow line at the back. It is made of PUROTOUCH, a high-quality, high-density polyurethane resin that is lightweight and durable. In addition, it is primed white and ready for paint, glaze, or finish so it can perfectly match your interior. Installation is fast and easy. Our molding can be installed using typical woodworking tools, and the integrated glue grooves guarantee a swift glue application. For best results, use Orac Decor’s Decofix adhesive.

• Product Type: Crown
• Molding Use: Ceiling
• Material: Urethane
• Overall: 1.125'' H x 78.75'' W
• Projection From Wall: 6.5mm

These came out awesome, easy to paint and trim.. Lynette. Salem, MA. 2022-02-12 10:04:49

Designed by Orio Tonini, Orac Decor’s CX189 crown molding features a compact angular design and is designed to incorporate LED lights if desired. *Note: LEDs not included in your order* The indirect lighting profile can be used as an uplighting or downlighting system, or as general lighting. LED indirect lighting produces a beautiful glow on the ceiling and creates a warm atmosphere in your home. It is made of DUROPOLYMER, a specially formulated polyurethane resin that is high density, water resistant, and impact resistant. This durable material will not warp with changes in temperature or humidity. Moldings come with a primed surface that is ready to paint. With integrated glue grooves, installation is fast and easy. We guarantee a full warranty when you use Orac Decor’s FDP500 adhesive. This interior molding also exists in a flexible form, CX189F.

• Product Type: Crown
• Molding Use: Ceiling
• Material: Urethane
• Overall: 1'' H x 78.75'' W
• Projection From Wall: 1mm

Easy to install, lightweight, super cute. Joycelyn. Hilo, HI. 2021-09-17 15:17:16

Orac Decor’s C396 “Steps” can be used in 4 different applications (as shown): curtain moulding, crown moulding and indirect lighting profile. LEDs sold separately. Curtain profiles hide curtain rods, allow for continuous trim along an entire room and are an elegant solution for floor1to1ceiling windows. Crown mouldings can visually enlarge and add style to an interior. Our molding can also be used as an indirect lighting profile by incorporating LED lights. Indirect lighting produces a beautiful glow on the ceiling, creating a warm atmosphere. It can be applied as uplighting, downlighting or general lighting. This versatile molding is made of Purotouch, a high1quality polyurethane blend, produced in steel molds to ensure consistent, crisp lines. It is impact resistant, water resistant, lightweight, easy to handle and paintable. Integrated glue grooves ensure easy installation. Full warantee when you use Orac Decor FDP500 adhesive.

• Product Type: Crown
• Molding Use: Ceiling
• Material: Urethane
• Overall: 7.5'' H x 78.75'' W
• Projection From Wall: 2mm

Looks great!. Julia. Boston, NY. 2022-05-04 10:41:01

Combining contemporary styling with smart engineering, orac decor c354 is one of a series of newly introduced flat cornice moldings (see orac decor c353, c355, and c356) and has an asymmetrical profile with an extended top surface projection across the ceiling. An innovative, recessed fine shadow line optimally encompasses and utilizes the natural light within your environment to yield an unexpected floating effect between itself and your walls. Orac decor c354 cornice molding is suited for use with other Orac moldings and millwork. Pre-primed and ready for painting or staining. This cornice molding is not available in a flexible format.

• Product Type: Crown
• Molding Use: Ceiling
• Material: Urethane
• Overall: 1.63'' H x 78.75'' W
• Projection From Wall: 8.5mm

don’t buy the adhesive-use a nail gun to install. looks great!. katherine. erie, PA. 2022-06-02 12:18:51

Orac Decor CX190 U1Profile can be used as a baseboard, crown molding, or indirect lighting profile, depending on which way you install it. When used as a baseboard, it is ideal for renovations as it can cover your existing wall molding so you don’t need to remove it. Save time and money without the hassle, mess, and waste! In addition, its inner cavity is cleverly designed to hide electrical cables. When used as an indirect lighting profile, insert LED lights (sold separately) to produce a nice glow and add a warm ambiance. This versatile molding is made of Duropolymer, a polyurethane resin that is high density, water resistant, and impact resistant. This durable material will not warp with changes in temperature or humidity. Moldings come with a primed surface that is ready to paint. With integrated glue grooves, installation is fast and easy. We guarantee a full warranty when you use our FDP500 DecoFix Pro FDP500 adhesive.

• Product Type: Crown
• Molding Use: Ceiling
• Material: Urethane
• Overall: 0.75'' H x 78.75'' W
• Projection From Wall: 1.125mm

This was perfect for what we needed it for in our game room however the hots spots were very noticeable for our liking. So, we had to paint them so that they were more opaque for the LED lights so there were no more hot spots.. DCM. VA. 2021-08-03 23:35:54

This product was designed by award-winning designer Ulf Moritz and consists of 2 modern profiles. Intended to enhance and modernize the existing architecture of your interior, it can be used to cover up imperfections and crevices in your wall or ceiling, as a crown molding, panel molding, or baseboard. It is easy to install using typical woodworking tools and comes primed white and ready for paint, glaze, or finish. This molding conceals LED indirect light and creates subtle lighting effects by playing with light and shadow. Indirect lighting will bring warmth to a room as it adds a beautiful glow to the ceiling, eliminating the harshness of a single central pendant light fitting. Compact LEDs are easy to install, cost little to run, long-lasting, and eco-friendly. This product is made of PUROTOUCH, a high-quality polyurethane resin that is created in steel molds to replicate plaster and allow for crisp edges. Distributed in the USA exclusively by Outwater Plastics, LCC, and Architecture by Outwater, LLC.

• Product Type: Crown
• Molding Use: Ceiling
• Material: Urethane
• Overall: 3.125'' H x 78.75'' W
• Projection From Wall: 2mm

Looks great. Worked great for Eve HomeKit controlled LED indirect lights. Lightweight, easy to cut with just a miter saw, a few brad nails, and caulk. Paints easily.. Pedro. Allen, TX. 2021-01-02 12:45:58

Orac Decor’s C394 can be used in 5 different applications (as shown), including as a curtain moulding, crown moulding + indirect lighting profile (LEDs sold separately). Curtain profiles hide curtain rods, allow for continuous trim along an entire room + are an elegant solution for floor1to1ceiling windows. Crown mouldings visually enlarge + add style to your interior. Our molding can also be used as an indirect lighting profile by incorporating LED lights. Indirect lighting produces a beautiful glow on the ceiling, creating a warm atmosphere. It can be applied as uplighting, downlighting or general lighting. This versatile molding is made of Purotouch, a high1quality polyurethane blend, produced in steel molds to ensure consistent, crisp lines. It is impact resistant, water resistant, lightweight, easy to handle + paintable. Integrated glue grooves ensure easy installation. Manufacturer guarantee when you use Orac Decor’s FDP500 adhesive.

• Product Type: Crown
• Molding Use: Ceiling
• Material: Urethane
• Overall: 3.75'' H x 78.75'' W
• Projection From Wall: 1.25mm

Very good super. Eduardo. Las Vegas, NV. 2022-10-20 07:24:15

With the new modern C380 profile, you can perfectly integrate indirect LED lighting into your design. This molding for indirect lighting can be used in conjunction with other profiles from this collection including the C381, C382, and C383, to create a sophisticated linear pattern of light and shadow.

• Product Type: Crown
• Molding Use: Ceiling
• Material: Urethane
• Overall: 2'' H x 78.75'' W
• Projection From Wall: 2mm

Beautiful light weight and great quality crown molding! Easy to install on wall and inserted indirect lighting in it to produce and elegant and cool lighting effect and improving the look of the room with the new crown molding!. Johnny. Charlotte, NC. 2021-02-08 08:59:45

Designed by world renown Belgian Architect, Xavier Donck, the large asymmetric C shaped profile of Orac Decor C990 Cornice Moulding is reminiscent of the mouldings used in 17th or 18th century French homes. Great for large rooms with high ceilings. This crown molding is made of PUROTOUCH, a high1quality polyurethane resin created in steel molds to replicate plaster and produce crisp edges. Installation is fast and easy. Orac’s mouldings can be installed using typical woodworking tools, and the integrated glue grooves guarantee a swift glue application. For best results, use Orac Decor’s Decofix adhesive. In addition, mouldings come primed white and ready for paint, glaze or finish so they can perfectly match your interior. Distributed in the USA exclusively by Outwater Plastics, LLC and Architecture by Outwater, LLC.

• Product Type: Crown
• Molding Use: Ceiling
• Material: Urethane
• Overall: 6.25'' H x 78'' W
• Projection From Wall: 8.5mm

Ordered one to see if it fits. SUPER light weight. Not damaged, good condition. Sad because I think it's not being sold anymore. M. Saint Paul, MN. 2021-04-24 10:31:48

Our Orac Decor crown molding can easily enhance the current design style of any space. Resistant to moisture and can be used in high humidity and damp areas, such as bathrooms or basements. This molding features one-piece construction which eliminates the need for the build-up and the possibility of post-construction separation or cracks. Produced from duropolymer, high-impact polystyrene is specially formulated by Orac Decor, which offers pronounced detailing and crisp, clean lines. Easily installed with Orac Decor's proprietary adhesives allowing you to cut down on cost and labor. 3-3/8" high x 3-3/8" projection x 4-3/4" face.

• Product Type: Crown
• Molding Use: Ceiling
• Material: Urethane
• Overall: 3.375'' H x 78'' W
• Projection From Wall: 3.375mm

Painted the crown molding the same color as my walls. Creates an illusion of high ceilings. I am so pleases with my new look.. Dollie. Shalimar, FL. 2021-08-31 22:44:51