Showing results for "cutting board display hooks"

WFX Utility™ Two-Sided Pegwall Spinner Floor Rack Display. Great looking white melamine finish, spinner rack features peg walls for easy hook arrangement. Come with 32 hooks. Hooks are 6" in length. Display area (net) is 18" wide 42" tall, and two-sided. Overall dimensions are 66" tall, and 20.5" wide. Header area is 18" diameter half circle. Header blank size is 18" W x 9.7" H. Made from MDF material with maple wood grain melamine. Spins at the bottom. Gridwall is 1" in the center. You can order more hooks by following this https://www.WFX Utility™.com/index.PHP?_route_=hook_10308-2-HOOK-10PK&search=10308-2Easy assembly. Assemble with only 9 screws. Step-by-step assembly video: https://youtu.be/p_X8-w0S-Lk. You can also search "10308-2 spinner rack with peg wall INSTRUCTIONS" on youtube to locate the video. Shipping to Canada and Mexico: import duty and fees apply.

• Made from MDF material with maple wood grain melamine. Spins at the bottom. Gridwall is 1" in the center.

Handcrafted in the USA, this product will help get your cookware, utensils, pots, pans, mugs, towels, or tools out of the drawer and up on the wall where you can organize and access them easily. A great solution for small spaces, urban living, and even your BBQ area. Includes 6 Straight Multi-Purpose Hooks. Hardware and instructions for recommended installation are included. Mounting directly into studs is recommended. Consult your handyman or local hardware store for mounting to your specific wall type. For custom sizes or if you have any questions, contact Enclume Design Products directly.

• Mounting / Installation Kit: Yes
• Number of Pot Hooks Included: 6
• Weight Capacity: 30lb.
• Mounting / Installation Required: Yes

Beautiful and adds flair to any kitchen!. Jon. Philadelphia, PA. 2022-12-18 08:06:51

• Frame Material: Wood
• Number of Hooks / Brackets: 12
• Hardware Material: Plastic

Save space in your cabinets while also making a statement in your kitchen! This pair of clever, space-saving Undershelf Hooks from Rebrilliant slide easily over a shelf in the kitchen. Each has hooks to hold 3 mugs or handled cups. No installation is required and there is no need to drill holes in the wall or cabinet.

• Set of 2
• Holds up to 6 cups or mugs
• Space-saving solution
• No tools required
• Made of durable, coated steel

• Overall: 65.5'' H x 20.5'' W x 20.5'' D
• Overall Product Weight: 28lb.
• Assembly Required: Yes

Kitchen under siege by the clutter of pots and pans? Lift them off your countertop with this wall-mounted pegboard rack. Made from metal in the USA, these two boards offer a total of 32'' x 32'' in the storage area and 300 holes. Eighteen pot hooks (included) can be adjusted to suit your positioning needs, whether you’re hanging spoons, heavy-duty pans, or cutting boards. This design mounts right into studs or sheet rock – no framework is required.

• Mounting / Installation Kit: Yes
• Number of Pot Hooks Included: 18
• Overall: 32'' H x 32'' W x 7'' D
• Overall Product Weight: 16lb.
• Weight Capacity: 200lb.

Why keep your coffee mugs tucked away behind some cupboard door when showcasing all your fun, unique, and elegant coffee cups in one easy-to-access place? This wooden coffee cup organizer rack provides 16 hooks for hanging coffee mugs and cups and is a great way to keep coffee and tea drinking supplies organized, or as a decorative way to display your collectible mugs. Easy to mount to flat wall surfaces with appropriate hardware (Mounting hardware not included), this mug storage rack makes for an excellent addition to your home kitchen, office break room, café, or coffee shop.

• Overall: 3.74'' W x 18.2'' D

Pegboard Spinners are the key to maximizing sales. Presentation of your product, easy customer accessibility, and visual appeal all contribute to your bottom line. Increase your impulse sales and place Azar’s versatile retail display racks by the cash wrap or anywhere in your store! This two-sided spinning pegboard floor merchandising display stands on a silver rotating metal base. This revolving swivel gondola merchandiser provides effortless shopping for your customers. The carousel is simple to assemble, no tools are required. Add hooks, bins, bucket or trays, then load your product on the perforated panels and you’re ready to start selling. This custom turntable display is ideal for department and convenience stores (c-stores), tradeshow booths, or any retail environment. Our display racks for retail are easy to clean and maintain. These free standing fixtures are strong and highly durable and can withstand high traffic areas. Choose your preferred color! Create a planogram that works best for you. Make your product pop with signage and branding using the T-strip on top of the pegboard display tower. Simply slide in a PVC header sign, card stock or use one of Azar’s stock sign holders which are available in clear transparent for insert your own sign or white opaque acrylic and mirror. Sign holder, hooks and accessories are sold separately.

• Sold in Multiples of: 1
• Material: High Impact Styrene
• Assembled Height: 61"H
• Panel Thickness: 0.125
• Panel Size: 13.5"W x 60"H

【Metal Pegboard Magnet Floor Display】This Metal Pegboard Magnet Rotating Floor Stand (pegboard hooks not include) can be used in a variety of retail settings to showcase magnets souveniors keychains... Great for Hardware Stores, Gift Shops, Electronics Stores, Craft and Hobby Stores, Pop-up Shops, even Trade Shows and Exhibitions. The shipping box is 32.7 inches in width, 15.8 inches in depth,3.35 inches in height with a gross weight of 26.6 pounds 【Recommand Hooks】Consider the pegboard hook 18477, you can purchase follow the link: https://www.wayfair.com/storage-organization/pdp/wfx-utility-4-metal-hook-metal-pegwall-wire-hook-black-wire-hook-for-metal-pegboard-w005011190.html 【Overall Size:15.75x15.75x66"】Overall dimensions are 15.75 inches in width, 15.75 inches in depth and 66 inches in height. Features with 2 pegboard towers, each tower is 7 inches in width, 7 inches in depth and 25 inches in height. The pegboard hole is 0.24-inch in diameter, with 0.5 inches apart in width and height. Bottom equipped 4 2-inch plastic casters, two of them have brakes 【Pegboard is Made from 19GA Steel】The pegboard is made of 19GA (1mm) metal steel with a black powder coated finish. The base is made of 0.8 inches square tube. The top of this display features a steel clip that can hold a graphic panel. This 4 sided pegboard display can be rotated 360 degrees for easy access to your merchandise so it can be fully displayed 【Assembly Video】Video Instructions link: https://youtu.be/NQpr9KREwtg. You can also search "10164 magnet display metal pegboard four sided floor rack stand spinner tower fridge fixturedisplays" on youtube to locate the video. You can also download video by following this link: https://www.fixturedisplays.com/video/10164.AVI

Black Wrought Iron Wall Mountable Tray or Platter Display Holder, 6.25" H x 7.5" W x 3.5" D, Pack of 2 Size: 6.25 x 7.5 x 3.5 inches (height x width x depth) Display Area: 5.5 x 7 x 3.25 inches (height x width x depth) Style: Wrought iron offers a clean, modern look for your display. What Size to Order? Begin by measuring the dimensions of the items you intend to display. Note the width, height, and depth of each piece. This will give you a clear idea of the minimum dimensions required for your platter hanger. Choose a hanger that will hold your item securely while keeping the scale and proportion in mind. How to Use? Elevate the presentation of your platters and trays with this wall-mountable hanger. Whether you're showcasing your items in retail locations, trade shows, or your home, providing essential information and capturing customers' attention in retail displays, enhancing your booth at events and trade shows, or adding a sophisticated touch to your home decor, this hanger offers a professional and captivating presentation that elevates your items in various environments. Does Not Include: Wall mounting hardware

• SIZE: 6.25 x 7.5 x 3.5 inches (height x width x depth) DISPLAY AREA: 5.5 x 7 x 3.25 inches (height x width x depth)
• MATERIAL: Black wrought iron
• DOES NOT INCLUDE: Wall mounting hardware

This is a modern yet functional, wall-mounted coat rack with ample hanging space where you need it most. The coat rack boasts a clever design with multiple hooks that retract when not in use, each one slipping neatly back into its groove for a sleek look and space-saving functionality. But don’t let the compact look fool you, because the coat rack can accommodate a surprisingly large number of items making it the perfect spot to hang coats, scarves, purses, and more for you, your family, and your guests. Thanks to the sleek profile and hidden mounting hardware, this mounts seamlessly to virtually any wall and offers styling that looks great in any entryway or foyer, regardless of how big or small it is.

• Frame Material: Solid Wood
• Number of Hooks / Brackets: 8
• Weight Capacity: 40lb.
• Weight Capacity per Hook: 5lb.
• Hardware Material: Metal

Very nice and sturdy. Good for the price.. Vicky. Winter Springs, FL. 2021-09-09 14:04:55

Pegboard Spinners are the key to maximizing sales. Presentation of your product, easy customer accessibility, and visual appeal all contribute to your bottom line. Increase your impulse sales and place Azar’s versatile retail display racks by the cash wrap or anywhere in your store! This two-sided spinning pegboard floor merchandising display stands on a silver rotating metal base. This revolving swivel gondola merchandiser provides effortless shopping for your customers. The carousel is simple to assemble, no tools are required. Add hooks, bins, bucket or trays, then load your product on the perforated panels and you’re ready to start selling. This custom turntable display is ideal for department and convenience stores (c-stores), tradeshow booths, or any retail environment. Our display racks for retail are easy to clean and maintain. These free standing fixtures are strong and highly durable and can withstand high traffic areas. Choose your preferred color! Create a planogram that works best for you. Make your product pop with signage and branding using the T-strip on top of the pegboard display tower. Simply slide in a PVC header sign, card stock or use one of Azar’s stock sign holders which are available in clear transparent for insert your own sign or white opaque acrylic and mirror. Sign holder, hooks and accessories are sold separately.

• Sold in Multiples of: 1
• Material: High Impact Styrene
• Assembled Height: 61"H
• Panel Thickness: 0.125
• Panel Size: 13.5"W x 60"H