Showing results for "foundation armor sx5000wb sealer"

The Armor AR350 is a solvent-based acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface enhance any dull and faded coloring, and protect the surface with a durable low gloss surface film. The Armor AR350 is a fantastic sealer if you are looking to bring out dull and faded surfaces and enhance surfaces with a low gloss wet-look finish. The Armor AR350 is made from high-quality, non-recycled, US-manufactured resins. It is non-yellowing, breathable, and has low VOC. The protective low gloss film will reduce damage and deterioration caused by surface abrasion and water absorption, including cracking, spalling, pitting, dusting, mold, mildew, and algae growth.

• It will darken the surface to make it look wet, bringing out any dull and faded coloring.
• Protective surface film will reduce damage and deterioration caused by water absorption and surface abrasion.
• Protective surface film will reduce the growth of mold, mildew, and algae on the surface.

This sealer worked great! Applied to stamped and colored concrete patio and pool deck. Really enhanced the look and color. Also brushed onto concrete faux rocks around pool. I ordered a sample bottle and the no -slip fine sand additive directly. After a trial run, I rolled two coats of this product on. Dried over 4-5 hours. Some fumes during install but went away overnight as it cured. Highly recommend this product. Arrived earlier than original estimate too.. Casey. El Cajon, CA. 2021-12-05 19:46:19

The Armor AR500 is a solvent-based acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface and enhance any dull and faded coloring, and protect the surface with a durable high gloss surface film. The Armor AR500 is a fantastic sealer if you are looking to bring out dull and faded surfaces, and enhance surfaces with a high gloss wet look finish.The Armor AR500 is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

• Will darken the surface to make it look wet, bringing out any dull and faded coloring
• Protective surface film will reduce damage and deterioration caused by water absorption and surface abrasion
• Protective surface film will reduce the growth of mold, mildew, and algae on the surface

Wonderful product!! Researched a ton of different sealers as I have heard horror stories of applying a sealer and having bubbling, clouding, etc. The reviews for this one were overwhelmingly positive so I gave it a shot. I followed the directions to a tee. I power washed and let the stamped concrete dry for an entire day. I began sealing after 5PM as recommended when the sun was no longer over the concrete. Came out beautiful!! Dried perfectly. Was a little nervous because it rained roughly 30 hours after being applied but no issues! Completely dried and the water pooled on the surface. I only did one coat because I felt it didn’t even need the second coat. Looks amazing and very shiny. Will definitely use again for years to come!. Alexander. Orrville, OH. 2021-05-24 11:13:16

The Armor AR350 is a solvent-based acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface enhance any dull and faded coloring, and protect the surface with a durable low gloss surface film. The Armor AR350 is a fantastic sealer if you are looking to bring out dull and faded surfaces and enhance surfaces with a low gloss wet-look finish. The Armor AR350 is made from high-quality, non-recycled, US-manufactured resins. It is non-yellowing, breathable, and has low VOC. The protective low gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

• Will darken the surface to make it look wet, bringing out any dull and faded coloring
• Protective surface film will reduce damage and deterioration caused by water absorption and surface abrasion
• Protective surface film will reduce the growth of mold, mildew, and algae on the surface

Great product. Larry. US. 2021-04-23 12:04:56

The Armor SX5000 WB is a PRO-Grade water-based penetrating water-repellent sealer. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption by up to 95%. The Armor SX5000 WB is made from high-quality, non-recycled, US-manufactured resins. It is designed for unsealed concrete, brick, pavers, natural stone, and porous masonry. It works entirely below the surface, won’t change the look or color of the substrate, and won’t leave a surface film. By reducing surface water absorption, cracking, spalling, pitting, mold, mildew, algae, staining, and other damage and deterioration caused by surface water absorption will also be reduced.

• Contains up to 5X more active materials than similar products on the market
• Works entirely below the surface, won’t change the look or color, and won’t leave a surface film
• When properly applied, the Armor SX5000 WB can provide up to 7-10 years of life on an exterior surface before the need to recoat
• Coverage: Porous Surfaces: Up to 175 FT2/gallon in one coat, Smooth Surfaces (once properly prepped): Up to 200-225 FT2/gallon in one coat.

Great product. Anna. St. John’s Florida. 2022-07-27 21:11:43

The Armor SX5000 is a PRO-Grade solvent-based Silane Siloxane water-repellent sealer. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption by up to 95%. The Armor SX5000 is made from high-quality, non-recycled, US-manufactured resins. It is designed for unsealed concrete, brick, pavers, natural stone, and porous masonry. It works entirely below the surface, won’t change the look or color of the substrate, and won’t leave a surface film. By reducing surface water absorption, cracking, spalling, pitting, mold, mildew, algae, staining, and other damage and deterioration caused by surface water absorption will also be reduced.

• Contains up to 5X more active materials than similar products on the market
• Works entirely below the surface, won’t change the look or color, and won’t leave a surface film
• When properly applied, the Armor SX5000 WB can provide up to 7-10 years of life on an exterior surface before the need to recoat
• Coverage: Porous Surfaces: Up to 175 FT2/gallon in one coat, Smooth Surfaces (once properly prepped): Up to 200-225 FT2/gallon in one coat.

The entrance and driveway of my home are comprised of stone pavers with some concrete in the driveway. I power- washed the entire area to remove the joint sand. The following day I carefully applied joint-lock sand between the pavers. I waited another day for the surface to completely dry from the water that was applied to activate the joint polymers. Once I was satisfied everything was completely dry, using a Chapin 20541,one-gallon, general-purpose sprayer, I began applying the SX5000 Silane-Siloxane solution. I made sure the five-gallon container I purchased was agitated sufficiently to ensure a homogeneous mixture before transferring one gallon into the sprayer. The SX5000 liquid sprayed evenly without any noticeable odor. The material was easily absorbed into the joints and surfaces of the pavers and concrete leaving an attractive satin finish. The instructions provided by Foundation Armor were excellent and they stressed preparing the surface properly. By following their advice the result was absolutely beautiful. Several neighbors commented on how attractive the finish was when they passed by. Once I resumed using the sprinkler system, I noticed the beading of the water on the hard surfaces that I treated the day earlier. I heartily recommend this product for its ease of use and living up to its advertised benefits. Kudos to Foundation Armor! They are to be commended for an excellent product!. Bill. . 2023-01-05 17:50:27

The Armor LV25 is a solvent-based acrylic cure and seal designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface enhance any dull and faded coloring, and protect the surface with a durable high gloss surface film. The Armor LV25 is a fantastic sealer if you are looking to bring out dull and faded surfaces and enhance surfaces with a high gloss wet-look finish. The Armor LV25 also doubles as a cure and seal and can be applied to new concrete. The Armor LV25 is made from high-quality, non-recycled, US-manufactured resins. It is non-yellowing, breathable, and has low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

• Will darken the surface to make it look wet, bringing out any dull and faded coloring.
• Meets ASTM 1315 and ASTM C 309 standards
• The protective surface film will reduce damage and deterioration caused by water absorption and surface abrasion.
• The protective surface film will reduce the growth of mold, mildew, and algae on the surface.

The Armor AR500 is a solvent-based acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface enhance any dull and faded coloring, and protect the surface with a durable high gloss surface film. The Armor AR500 is a fantastic sealer if you are looking to bring out dull and faded surfaces and enhance surfaces with a high gloss wet-look finish. The Armor AR500 is made from high-quality, non-recycled, US-manufactured resins. It is non-yellowing, breathable, and has low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

• Will darken the surface to make it look wet, bringing out any dull and faded coloring
• Protective surface film will reduce damage and deterioration caused by water absorption and surface abrasion
• Protective surface film will reduce the growth of mold, mildew, and algae on the surface

Amazing product, I saw it on wayfair and decided to try it out. It was better than any other product I have used in the past. The shine is amazing and the application was easy and results are outstanding.. Dylan. Boyds, MD. 2023-03-05 12:39:16

The Armor AX25 combines two great products into one! With the AX25, you get a penetrating water repellent sealer, and a high gloss acrylic coating - all packed into one amazing product!The Armor AX25 is a solvent-based siloxane-infused acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface and enhance any dull and faded coloring, and protect the surface with a durable high gloss surface film. The Armor AX25 is a fantastic sealer if you are looking to bring out dull and faded surfaces, enhance surfaces with a high gloss wet look finish, and provide superior water repellency benefits to the surface. The Armor AX25 also doubles as a cure and seal and can be applied to new concrete.The Armor AX25 is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

• Will provide superior water repellency benefits to areas constantly exposed to water, such as a pool deck
• Will darken the surface to make it look wet, bringing out any dull and faded coloring
• Meets ASTM 1315 and ASTM C 309 standards
• Protective surface film will reduce damage and deterioration caused by water absorption and surface abrasion
• Protective surface film will reduce the growth of mold, mildew, and algae on the surface

I bought a 5 gallon bucket for our large acrylic painted concrete patio. In the past, my concrete guy handled this but he's been MIA because this is too small of a job for him. I settled on the AX25 because I wanted an oil-based product to give it shine and bring back some of the slightly faded colors. Positives: it looks great, it was super easy to apply, it did rejuvenate the colors and I was able to cover many more square feet than I had calculated. I thought I was going to need 10 gallons for the work, but I was able to apply 2 full coats and have maybe ~ 1 gallon left over for my front walkway. My concrete is (deliberately not smooth and I did not add any anti-slip agents. Negatives: None for the product. Two thumbs down for FoundationArmor using FedEx for delivery: this heavy drum dropped off at another house 3/4 mile away (whose address is not similar to mine. I needed this immediately and was (thankfully able to drive around and spot the box on their front porch.. Scott T.. . 2023-01-05 17:51:47

The Armor AX25 combines two great products into one! With the AX25, you get a penetrating water repellent sealer, and a high gloss acrylic coating - all packed into one amazing product!The Armor AX25 is a solvent-based siloxane-infused acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface and enhance any dull and faded coloring, and protect the surface with a durable high gloss surface film. The Armor AX25 is a fantastic sealer if you are looking to bring out dull and faded surfaces, enhance surfaces with a high gloss wet look finish, and provide superior water repellency benefits to the surface. The Armor AX25 also doubles as a cure and seal and can be applied to new concrete.The Armor AX25 is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

• Will provide superior water repellency benefits to areas constantly exposed to water, such as a pool deck
• Will darken the surface to make it look wet, bringing out any dull and faded coloring
• Meets ASTM 1315 and ASTM C 309 standards
• Protective surface film will reduce damage and deterioration caused by water absorption and surface abrasion
• Protective surface film will reduce the growth of mold, mildew, and algae on the surface

The Armor WL550 is a penetrating, matte wet look water repellent sealer. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption by up to 95%. It will darken the surface to slightly enhance any dull and faded coloring. The Armor WL550 is made from high-quality, non-recycled, US-manufactured resins. It is designed for unsealed concrete, brick, pavers, natural stone, and porous masonry. It works entirely below the surface and won’t leave a surface film. By reducing surface water absorption, cracking, spalling, pitting, mold, mildew, algae, staining, and other damage and deterioration caused by surface water absorption will also be reduced.

• VOC Regulations: This product can not be shipped to California.

Great product. Easy to use. Our outdoor marble came out beautifully. It really brought out the beauty of the marble without making it shiny. The product arrived quickly.. Paula. Atlanta, GA. 2023-05-03 09:23:05

The Armor AG BROWN SEAL is a solvent-based acrylic sealer designed to enhance, seal, and protect exposed aggregate concrete surfaces. It will darken the surface and enhance any dull and faded coloring, and protect the surface with a durable high gloss brown-tinted surface film. The Armor AG BROWN SEAL is a fantastic sealer if you are looking to bring out dull and faded exposed aggregate concrete, and enhance them with a brown-tinted high gloss wet look finish.The Armor AG BROWN SEAL is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

• Will darken the surface to make it look wet, bringing out any dull and faded coloring
• Brown-tinted transparent protective surface film will reduce damage and deterioration caused by water absorption and surface abrasion
• Protective surface film will reduce the growth of mold, mildew, and algae on the surface
• Breathable, UV resistant, made in the USA

The Armor WB15 is a water-based acrylic sealer designed to seal and protect concrete and paver surfaces with a durable low gloss surface film. The Armor WB15 is a fantastic sealer if you are looking to enhance surfaces with a low gloss finish.The Armor WB15 is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective low gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

• Protective surface film will reduce damage and deterioration caused by water absorption and surface abrasion
• Protective surface film will reduce the growth of mold, mildew, and algae on the surface

I highly recommend the FA's low gloss sealer, based on my experience. I applied it to my outdoor patio and walkways. After 6 weeks, water still beads nicely, the concrete has a nice sheen and I have no complaints about the overall appearance. I used a paint roller and waited the prescribed time before applying a second coat. I was careful not to allow the product to puddle in any areas except in the concrete's relief cracks. The cracks took about a week to fully dry, and appeared milky at first, but ultimately cleared up. The concrete has freckles when wet, suggesting an uneven level of sealer protection. I therefore regret not having applied a third coat, and will do so sometime later this year. I purchased the low gloss version of this sealer, with plans to use it on both concrete and brick. It was not apparent to me from the online descriptions that low gloss was not for brick, but the container's label instructions specifically state do NOT use on brick. So I was forced to also purchase a brick sealer. I decided to stay with the FA line, but, unfortunately, their brick sealer leaves a matte finish. Although I would have been happier with an equivalent sheen on the brick, I'm finding that version of the sealer is also performing well. I do have a complaint about the packaging. I purchased the concrete sealer in 5 gallon tubs, the kind made by Letica and often used for equivalent volumes of paint. The instructions on the concrete sealer label are to stir well, but, to do so, the lid needs to be cut away in order to get into the bucket. Cutting the lid is very difficult and makes it unusable, so the pour spout is worthless, and keeping the container closed becomes a challenge. I was hesitant about buying this brand because of the price, but after reading online reviews of competing products, I decided that I didn't want to risk any similar negative experiences. As long as you follow directions and don't allow excess material to puddle, you'll likely find that the protection is worth the price.. David In The Bluegrass. . 2023-01-05 17:52:06