Showing results for "kitchen cabinet pullout and lift"

Rev-A-Shelf® has kept design and flexibility in mind with this heavy-duty appliance lift system. The lifting mechanism makes lifting a heavy or awkward appliance a breeze with its spring-loaded supports and 3 different weight settings. The 1-1/2" thick maple shelf is included and ready to install. Finally, this unit features (2) built-in dampeners that allow this unit to gently glide back inside of your cabinet with very little assistance needed.

• Overall: 15'' W x 23.63'' D

As a wheelchair user, lifting my kitchen aid to set it on the counter was not feasible. Having this lift adds some counter space and makes it accessible.. Allyson. Englewood, CO. 2022-11-14 08:59:55

Save your back and counter space with a Soft-close appliance lift. This hardware provides mechanical assistance for heavy appliances such as a stand mixer. The lift attaches to the interior of the cabinet and attaches to a shelf (not provided). The shelf can be custom-sized to fit any cabinet from a 12" minimum to a 24" maximum. Soft-close dampers ensure slow and smooth closure into the cabinet. Lift locks into place when fully extended. Three spring settings for up to 45 lb weight rating. Can be used in either face frame or frameless cabinetry.

• Overall: 11.5'' W x 20.5'' D

Absolutely best thing I have put in my kitchen. Wife is happy now that she no longer has to move her heavy KitchenAide mixer around when she wants to use it and it is off the counter which helps the appearance. When she uses it she just has to reach down and lift it out with 2 fingers and when she is done she pulls the handle and pushes down slightly and then it takes over and slowly lowers back into the cabinet like magic. A strongly recommended addition for your kitchen, you won’t be disappointed.. Michael. Imperial, MO. 2021-08-13 11:18:56

Rev-A-Shelf® 5300 Pullout Pantry Series is the answer to your full access (frameless) cabinetry needs. The series now offers increased basket depths for 21.75" deep cabinetry and comes in five different widths and four height ranges. Available in a beautiful maple or contemporary gray solid bottom to match every kitchen style, the 5300 Series glides quietly on 250 lb. rated full-extension, soft-close slide system. Features micro-adjustable door-mounting and all kits are packaged with frame, baskets and hardware.

• Overall: 8'' W x 21.7'' D

Great storage solution, allows access to all your pantry items. Install was simple except the door mount which was a lite tricky.. Kristen. Cliffside Park, NJ. 2023-01-22 19:30:40

You love your stand mixer but hate how hard it is to transfer from cabinet storage to the countertop. Experience the ultimate kitchen organization with this Rev-A-Shelf Lift Assist Mechanism. Crafted with care, this product is designed to bring convenience to your home, so you can easily access your bulky appliances with minimal lifting. With flexibility in mind, the heavy-duty chrome appliance riser can be attached to any custom-made shelf, which will fit all Full-height cabinets with a minimum frame opening of 12'' to 21''. Featuring a soft-close dampener, you can adjust the spring tension and hold appliances that weigh up to 60 lb. The soft-close damper allows it to glide back into the cabinet gently and quietly. By installing the spring-loaded bracket kit, you can eliminate the hassle of squatting and lifting heavy appliances like food processors, blenders, and toasters. The Rev-A-Shelf small appliance lift mechanism is a versatile, durable, and convenient solution for your storage needs. It provides an efficient way to maximize your pantry storage and reach appliances with ease. Save your back pain and start mixing with the revolutionary Mechanical Appliance Lift Mechanism from Rev-A-Shelf. Before purchasing, check your cabinet opening to ensure the best fit. Measure side to side, front to back, and top to bottom. Make sure your product is within measurements, and don't forget to take into account any obstructions.

• Overall: 24'' W x 12'' W x 22.5'' D

The Lift System Enhances Utilization of Heavy Kitchen Aid Mixer The kitchen renovation incorporated plans to make better use of the mixer with easier access. The installation was professionally done, although I probably could have completed the hard labor myself (LOL). I am very happy with the outcome and can now enjoy a few more years of use because of the convenience of no longer having to pull it out of a closet or from an awkward shelf. A bonus was to have the fabricator place a pull-out shelf just below the resting position of the Heavy Duty Lift System and it worked out quite well. The bottom-line, if you still enjoy the challenge of fine food preparation and need a little assistance that a mechanism such as this device provides, than you should go for it. It is sturdy, well constructed and easy to utilize. Installation (?), my fabricator said it was a cinch! Bon Appetite! . warren. Mantua, NJ. 2020-06-11 13:35:12

Building/remodeling your old kitchen? Well, all kitchens are not the same size and sometimes you are left with extra space that you hate to go wasted. Look no further and waste no more. Rev-A-Shelf® has created a filler that takes previously wasted and unusable space and creates a functional organizer. Fillers are intended to be installed in-between (2) cabinets in new kitchen construction/remodel job and will not work in existing kitchen cabinets. Fillers are available for your wall and base cabinets and also come in 3”, 6” and 9” widths and various heights (for wall cabinets). It is always good to consult with your kitchen designer to see if you have the space to add a filler.

• Included: (1) Wood filler, (3) adjustable shelves with Chrome rails
• 3-Piece zinc plated heavy-duty full-extension ball-bearing slide system
• Once installed simply attach your matching panel or door
• Fillers do not go inside of a cabinet, they install in-between cabinets
• Adjustable and/or removeable shelves

Very important! Please read our detailed measuring guide under 'specifications' before placing your order. This slide-out shelf is custom-made to fit the measurements of your cabinet’s clear opening width and unobstructed interior depth. You will round down and select your closest cabinet opening width and depth measurements from the drop-down menus above. Note: we will manufacture your slide-outs based on the cabinet measurements you select from the drop-down menu. Once installed, your slide-out shelf will have an approximate ¼ - inch clearance on each side for a perfect fit. To begin, first reference the cabinet measuring guide in the 'specifications' section below. All slide-a-shelf cabinet organizers are custom-made to fit your clear cabinet opening width and unobstructed internal depth measurements. Don’t assume measurements. Watch our how-to-measure video and use our measuring guide; cabinets can be constructed in a variety of ways and utilize different hinges/hardware that can impact your measurements. Full extension rails with soft closing feature: the Slide-A-Shelf standard made-to-fit slide-out shelf featured here includes steel full-extension ball-bearing rails with a soft closing feature. It comes fully assembled for quick and easy installation to the base/floor of your cabinet or existing full shelf…an installation template and all hardware are included. This slide-out shelf will fit perfectly and increase the usable storage space of the existing cabinets in your home. They are ideal for your kitchen, pantry, bathrooms, laundry room, linen closet, or garage. Now, you can finally get organized and enjoy the convenience of having all the items you store within easy reach. Say goodbye to messy and cluttered shelves. Unlike other roll-out shelves, all slide-a-shelf models are custom-made to fit your cabinets. Choice of wood front: the Slide-A-Shelf standard made-to-fit slide-out shelf is available in your choice of 4 wood fronts to complement your cabinet finish and décor. Birch (pre-finished) Maple (ready to finish) Oak (ready to finish) Poplar (ready to paint) Structure: Slide-A-Shelf standard made-to-fit slide-out shelves are designed with dado and rabbet joint construction for superior strength and are maintenance-free for years of convenience. Installation takes only minutes with a battery-powered Phillips screwdriver. You can find our easy installation guide under the ‘specifications’ below. Solid 9-ply UV cured polyurethane coated birch construction featuring full-extension, heavy-duty ball bearing slides rated for 100 lbs. including the weight of the shelf. Per the detailed measuring instructions; "We will manufacture your slide-outs to the exact dimensions of the opening you provide, with an approximate 1/4 inch clearance of the opening on each side." So, the front wood trim of the shelf will always measure 1/2 inch less than the width of the clear cabinet opening to ensure that it fits the cabinet perfectly. We recommend that you select the clear-width opening of your cabinet. We will manufacture the shelf and rails to fit within the opening. If you were to select 20" as the opening the usable width inside the shelf would be approximately 17 5/8". To remove the slide-out shelf, extend the shelf out, and locate the black levers on each side of the shelf rails. At the same time, push the black levers down on the right side, and up on the left side. The rails should release and you will be able to pull the shelf out of the cabinet.

*** Note: This product includes only one drawer. A **12-inch width drawer** refers to a drawer box with an **11-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **12 inches of space** for installation. Suitable for **RTA cabinets B15 and pantry cabinets PC15**. A **15-inch width drawer** refers to a drawer box with a **14-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **15 inches of space** for installation. Suitable for **RTA cabinets B18 and pantry cabinets PC18**. An **18-inch width drawer** refers to a drawer box with a **17-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **18 inches of space** for installation. Suitable for **RTA cabinets B21**. **Note:** This cabinet size is not very common. Please carefully measure the **internal width** of your cabinet, not the external width. A **21-inch width drawer** refers to a drawer box with a **20-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **21 inches of space** for installation. Suitable for **RTA cabinets B24 and pantry cabinets PC24**. A **24-inch width drawer** refers to a drawer box with a **23-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **24 inches of space** for installation. Suitable for **RTA cabinets B27**. **Note:** This cabinet size is not very common. Please carefully measure the **internal width** of your cabinet, not the external width. A **27-inch width drawer** refers to a drawer box with a **26-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **27 inches of space** for installation. Suitable for **RTA cabinets B30 and pantry cabinets PC30**. A **30-inch width drawer** refers to a drawer box with a **29-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **30 inches of space** for installation. Suitable for **RTA cabinets B33**. **Note:** This cabinet size is not very common. Please carefully measure the **internal width** of your cabinet, not the external width. A **33-inch width drawer** refers to a drawer box with a **32-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **33 inches of space** for installation. Suitable for **RTA cabinets B36 and pantry cabinets PC36**.

• The drawer uses dovetail joints, which are the strongest connection method available today—much stronger than using nails.
• Solid Wood: This drawer is made of 5/8 inch thick solid wood with an ultra-strong 1/4 inch thick plywood bottom.
• Fully extended ball bearing drawer slides (tracks)

No assembly is required, quick and easy. multiple pre-drilled holes, allowing for side mounting or bottom mounting. **For framed cabinets**: Simply measure the **opening width** of your cabinet and match it to our product dimensions. The included wooden strips will perfectly fill the gaps on both sides of the slides inside the cabinet. **For frameless cabinets**: Measure the **internal width** of the cabinet and subtract the total width of the wooden strips on both sides (1.5 inches). match the adjusted measurement to our product dimensions when ordering. **Note**: The total width of our drawers includes the slide width but does not include the width of the wooden strips. This design ensures a **perfect fit** for both framed and frameless cabinets, providing a seamless and professional installation experience. Components include: soft close sliding drawer assembly slide rail is a fully extended ball bearing drawer slide rail, mounting screws x 4, fixed wooden strips x 2 organizers natural wood color solid wood construction natural wood color is perfect for kitchen, bathroom, laundry room, and utility room storage. Soft close slider 45 mm slider: this roll-out drawer for the cabinet includes 20-inch full extension drawer slides (side-mounted) this wood drawer opens smoothly, and the drawer fully extends for easy access to cookware, small appliances, non-perishables, and more. Made entirely of wood installs easily no nails and glue are necessary. This cabinet pull-out tray is good for pantry, vanities, and under sinks. CabinetRTA, pull-out, wood drawer, box, pull-out, cabinet, organize, cabinet pull-out organizers, kitchen, bathroom, laundry, room, utility room, storage, very good pantry, vanities, under the sink. Bedroom, offices, bathroom storage.

Very Important! Please Read Our Detailed Measuring Guide Under 'Specification' Before Placing Your Order. This slide-out shelf is custom-made to fit the measurements of your cabinet’s clear opening width and unobstructed interior depth. You will round down and select your closest cabinet opening width and depth measurements from the drop-down menus above. Note: we will manufacture your slide-outs based on the cabinet measurements you select from the drop-down menu. Once installed, your slide-out shelf will have an approximate ¼ - inch clearance on each side for a perfect fit. To begin, first reference the cabinet measuring guide in the 'specifications' section below. All slide-a-shelf cabinet organizers are custom-made to fit your clear cabinet opening width and unobstructed internal depth measurements. Don’t assume measurements. Watch our how-to-measure video and use our measuring guide; cabinets can be constructed in a variety of ways and utilize different hinges/hardware that can impact your measurements. Full extension rails: the Slide-A-Shelf standard made-to-fit slide-out shelf featured here includes steel full-extension ball-bearing rails. It comes fully assembled for quick and easy installation to the base/floor of your cabinet or existing full shelf…an installation template and all hardware are included. This slide-out shelf will fit perfectly and increase the usable storage space of the existing cabinets in your home. They are ideal for your kitchen, pantry, bathrooms, laundry room, linen closet, or garage. Now, you can finally get organized and enjoy the convenience of having all the items you store within easy reach. Say goodbye to messy and cluttered shelves. Unlike other roll-out shelves, all slide-a-shelf models are custom-made to fit your cabinets. Choice of wood front: the Slide-A-Shelf standard made-to-fit slide-out shelf is available in your choice of 4 wood fronts to complement your cabinet finish and décor. Birch (pre-finished) Maple (ready to finish) Oak (ready to finish) Poplar (ready to paint) Structure: Slide-A-Shelf standard made-to-fit slide-out shelves are designed with dado and rabbet joint construction for superior strength and are maintenance-free for years of convenience. Installation takes only minutes with a battery-powered Phillips screwdriver. You can find our easy installation guide under the ‘specifications’ below.

• Overall: 5.5'' W x 19.5'' D

Rev-A-Shelf introduces the pull out pantry. Created for both base and tall 36” pantry cabinets, the series features amenities the competitors just don’t offer: From an industrial piano hinge, adjustable inside door and chrome rails, to the flexibility of being able to add or remove stylish chrome bars to the top of the units for additional shelf space on both doors and swing-out pantry. The solid construction consists of 0.5” maple that has a UV cured, clear finish to ensure a beautiful match to any cabinet. The complete kit includes two swing-out units and two-door storage units with adjustable mounting brackets.

• Overall Depth - Front to Back: 7.5''

I have a 20 year old, but still in style, KraftMaid pantry that needed updating. Items were getting lost to the back of the 23 inch deep x 36 inch wide cabinet shelves. I purchased this system to retrofit the cabinet. With a little ingenuity and about 10 to 12 hours, I have a new organization system that fits all my baking needs, and items are easy to find. I ripped the original cabinet shelves to provide multiple 10 x 36 inch shelves across the cabinet back, installed an upright to hold the swing out shelves, and attached the other shelves to the cabinet doors. The only things I might change are to make the shelves that attach to the doors 6" deep rather than 4", as the 4" limits what you can keep on the doors and change how those shelves attach to the doors. I was fighting to place the middle anchor screws given the location of my cabinet hardware and the adjustment bolts infringe on the already narrow shelf space.. Kirsten. Arvada, CO. 2019-12-09 23:13:48

Keep your kitchen shelves organized with the Rev-A-Shelf Pullout Cabinet Organizer. This pullout shelf allows you to clean up all your cooking supplies while storing them in one space for easy access, making it an ideal storage addition for your kitchen, pantry, bathroom, under the sink cabinet, and more. This wood cabinet organizer has 3 adjustable shelves with chrome rails to help keep everything in place. You'll have plenty of support for storing all your cooking accessories due to the 100-pound full-extension ball-bearing slide system this organizer features. Adjustable door mount brackets offer 5 inches of adjustability. The natural maple construction with a semi-gloss finish complements any kitchen style. Made with durable construction, this pullout shelf organizer is your excellent and ideal choice that can last for years to come. Double-check your cabinet's opening (inside dimensions) to allow the best fit. Measure side to side, front to back, and top to bottom. Double-check your product is within measurements, and don't forget to account for any obstructions. Cook your favorite meals with easy access to your spices and oils thanks to this Rev-A-Shelf Pullout Cabinet Organizer.

• Features fully-assembled maple wood construction with a clear coat finish for durability
• Mounts to cabinet floor and fits an existing full-height cabinet; Door must attach to gain full features and functionality
• Simple but effective 3-piece zinc plated full-extension ball-bearing slide system for organizing almost any kitchen
• Adjustable and removable shelves plus adjustable rub brushings for a precise fit

No more bending down or rifling through drawers of utensils or shelves of spices. With the Rev-A-Shelf Kitchen Cabinet Pullout Organizer, storing kitchen essentials has never been so simple. Simply use the slide-out spice rack when you want to access your ingredients or kitchen tools and back in when you’re done. The 3 removable stainless steel bins house all your needed utensils, and the 2 adjustable shelves with chrome rails hold your spices and oils. The full-extension BLUMOTION slides feature a soft-close and can support up to 110 lb. Double check your cabinet's opening to allow the best fit. Measure side to side, front to back, and top to bottom. Double check your product is within measurements, and don't forget to account for any obstructions. Door mounting is a breeze with Rev-A-Shelf's patented door mounting brackets that provide flexibility for trouble-free installation on any door style. This Pullout spice rack and utensil organizer will work for all Full-height under cabinets. This Pullout shelf organizer is a versatile, durable, and convenient solution for all your storage and organization needs. It provides an efficient way to keep your space well-organized, and free from clutter. Maximize what your kitchen cabinets can do with the Rev-A-Shelf Kitchen Cabinet Pullout Organizer. Upgrade your home by combining convenience and aesthetics through Rev-A-Shelf organization and storage solutions.

• Overall: 5.5'' W x 21.625'' D

These things are never fun to put together but once it’s done we have this great contraption that hides all that kitchen junk so our tiny kitchen can always look clean.. Kelly. Milford, OH. 2020-11-29 10:51:03