Showing results for "kraftmaid cabinets kitchen pull out ladder"

Rev-A-Shelf® 5300 Pullout Pantry Series is the answer to your full access (frameless) cabinetry needs. The series now offers increased basket depths for 21.75" deep cabinetry and comes in five different widths and four height ranges. Available in a beautiful maple or contemporary gray solid bottom to match every kitchen style, the 5300 Series glides quietly on 250 lb. rated full-extension, soft-close slide system. Features micro-adjustable door-mounting and all kits are packaged with frame, baskets and hardware.

• Overall: 8'' W x 21.7'' D

Great storage solution, allows access to all your pantry items. Install was simple except the door mount which was a lite tricky.. Kristen. Cliffside Park, NJ. 2023-01-22 19:30:40

Improve your counter sightlines by conveniently storing kitchen utensils in this pullout designed for 9" openings. This pullout features premium soft-close under-mounted slides and a patented top mounting bracket with a heavy-duty slide on the top. Eliminates side-to-side movement and sag commonly seen in other pullouts. Fully assembled with four stainless steel canisters and a bottom fixed shelf for additional storage. Slides are pre-installed for quick and easy installation.

• Overall: 8.5'' W x 22'' D

Great item! Plenty of room to keep my utensils handy by stove.. Lynne. GA. 2022-04-26 14:08:48

Rev-A-Shelf® has kept design and flexibility in mind with this heavy-duty appliance lift system. The lifting mechanism makes lifting a heavy or awkward appliance a breeze with its spring-loaded supports and 3 different weight settings. The 1-1/2" thick maple shelf is included and ready to install. Finally, this unit features (2) built-in dampeners that allow this unit to gently glide back inside of your cabinet with very little assistance needed.

• Overall: 15'' W x 23.63'' D

As a wheelchair user, lifting my kitchen aid to set it on the counter was not feasible. Having this lift adds some counter space and makes it accessible.. Allyson. Englewood, CO. 2022-11-14 08:59:55

No assembly is required, quick and easy. multiple pre-drilled holes, allowing for side mounting or bottom mounting. **For framed cabinets**: Simply measure the **opening width** of your cabinet and match it to our product dimensions. The included wooden strips will perfectly fill the gaps on both sides of the slides inside the cabinet. **For frameless cabinets**: Measure the **internal width** of the cabinet and subtract the total width of the wooden strips on both sides (1.5 inches). match the adjusted measurement to our product dimensions when ordering. **Note**: The total width of our drawers includes the slide width but does not include the width of the wooden strips. This design ensures a **perfect fit** for both framed and frameless cabinets, providing a seamless and professional installation experience. Components include: soft close sliding drawer assembly slide rail is a fully extended ball bearing drawer slide rail, mounting screws x 4, fixed wooden strips x 2 organizers natural wood color solid wood construction natural wood color is perfect for kitchen, bathroom, laundry room, and utility room storage. Soft close slider 45 mm slider: this roll-out drawer for the cabinet includes 20-inch full extension drawer slides (side-mounted) this wood drawer opens smoothly, and the drawer fully extends for easy access to cookware, small appliances, non-perishables, and more. Made entirely of wood installs easily no nails and glue are necessary. This cabinet pull-out tray is good for pantry, vanities, and under sinks. CabinetRTA, pull-out, wood drawer, box, pull-out, cabinet, organize, cabinet pull-out organizers, kitchen, bathroom, laundry, room, utility room, storage, very good pantry, vanities, under the sink. Bedroom, offices, bathroom storage.

Building/remodeling your old kitchen? Well, all kitchens are not the same size and sometimes you are left with extra space that you hate to go wasted. Look no further and waste no more. Rev-A-Shelf® has created a filler that takes previously wasted and unusable space and creates a functional organizer. Fillers are intended to be installed in-between (2) cabinets in new kitchen construction/remodel job and will not work in existing kitchen cabinets. Fillers are available for your wall and base cabinets and also come in 3”, 6” and 9” widths and various heights (for wall cabinets). It is always good to consult with your kitchen designer to see if you have the space to add a filler.

• Included: (1) Wood filler, (3) adjustable shelves with Chrome rails
• 3-Piece zinc plated heavy-duty full-extension ball-bearing slide system
• Once installed simply attach your matching panel or door
• Fillers do not go inside of a cabinet, they install in-between cabinets
• Adjustable and/or removeable shelves

*** Note: This product includes only one drawer. A **12-inch width drawer** refers to a drawer box with an **11-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **12 inches of space** for installation. Suitable for **RTA cabinets B15 and pantry cabinets PC15**. A **15-inch width drawer** refers to a drawer box with a **14-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **15 inches of space** for installation. Suitable for **RTA cabinets B18 and pantry cabinets PC18**. An **18-inch width drawer** refers to a drawer box with a **17-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **18 inches of space** for installation. Suitable for **RTA cabinets B21**. **Note:** This cabinet size is not very common. Please carefully measure the **internal width** of your cabinet, not the external width. A **21-inch width drawer** refers to a drawer box with a **20-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **21 inches of space** for installation. Suitable for **RTA cabinets B24 and pantry cabinets PC24**. A **24-inch width drawer** refers to a drawer box with a **23-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **24 inches of space** for installation. Suitable for **RTA cabinets B27**. **Note:** This cabinet size is not very common. Please carefully measure the **internal width** of your cabinet, not the external width. A **27-inch width drawer** refers to a drawer box with a **26-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **27 inches of space** for installation. Suitable for **RTA cabinets B30 and pantry cabinets PC30**. A **30-inch width drawer** refers to a drawer box with a **29-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **30 inches of space** for installation. Suitable for **RTA cabinets B33**. **Note:** This cabinet size is not very common. Please carefully measure the **internal width** of your cabinet, not the external width. A **33-inch width drawer** refers to a drawer box with a **32-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **33 inches of space** for installation. Suitable for **RTA cabinets B36 and pantry cabinets PC36**.

• The drawer uses dovetail joints, which are the strongest connection method available today—much stronger than using nails.
• Solid Wood: This drawer is made of 5/8 inch thick solid wood with an ultra-strong 1/4 inch thick plywood bottom.
• Fully extended ball bearing drawer slides (tracks)

Conveniently pack away all of your cleaning supplies with the Cabinet Storage Organizer by Rev-A-Shelf. This reliable organizer is perfect for storing supplies in a convenient spot under the sink whether it be in the bathroom or kitchen. This storage option is constructed out of natural maple wood with a UV cured semi-gloss finish for durability and to stop scratches. The premium chrome rails secure all your cleaning supplies from falling out as your open or close the door. This set includes hardware to make installation and removal quick, easy, and painless. The package includes the L-Shaped wood organizer, soft-close slides, 6 acrylic bins, and mounting hardware. Double check your cabinet's opening to allow the best fit. Measure side to side, front to back, and top to bottom. Double check to make sure your product is within measurements and don't forget to take into account any obstructions. Whether it's going under the sink in the bathroom, kitchen, or garage the Cabinet Storage Organizer by Rev-A-Shelf has you covered.

• Overall: 8.75'' W x 18.75'' D

Bought four of them for our master bathroom vanity since they are narrow cabinets with obstructive plumbing and these were perfect! They totally navigate the pipes and are a much better use of the cabinet space compared to just throwing everything in there and hoping it all fits properly. There was truly no other off-the- shelf storage solution that worked for this tight space. Installation was very easy although the paper template didn't exactly line up with all the slider frames so use the frame itself as the template and mark the holes accordingly for more accurate hole locations and ease of installation. Great product overall and very clever! Note: these are the smaller of the two sizes available. . Andrew. San Diego, CA. 2020-05-05 18:43:00

Very important! Please read our detailed measuring guide under 'specifications' before placing your order. This slide-out shelf is custom-made to fit the measurements of your cabinet’s clear opening width and unobstructed interior depth. You will round down and select your closest cabinet opening width and depth measurements from the drop-down menus above. Note: we will manufacture your slide-outs based on the cabinet measurements you select from the drop-down menu. Once installed, your slide-out shelf will have an approximate ¼ - inch clearance on each side for a perfect fit. To begin, first reference the cabinet measuring guide in the 'specifications' section below. All slide-a-shelf cabinet organizers are custom-made to fit your clear cabinet opening width and unobstructed internal depth measurements. Don’t assume measurements. Watch our how-to-measure video and use our measuring guide; cabinets can be constructed in a variety of ways and utilize different hinges/hardware that can impact your measurements. Full extension rails with soft closing feature: the Slide-A-Shelf standard made-to-fit slide-out shelf featured here includes steel full-extension ball-bearing rails with a soft closing feature. It comes fully assembled for quick and easy installation to the base/floor of your cabinet or existing full shelf…an installation template and all hardware are included. This slide-out shelf will fit perfectly and increase the usable storage space of the existing cabinets in your home. They are ideal for your kitchen, pantry, bathrooms, laundry room, linen closet, or garage. Now, you can finally get organized and enjoy the convenience of having all the items you store within easy reach. Say goodbye to messy and cluttered shelves. Unlike other roll-out shelves, all slide-a-shelf models are custom-made to fit your cabinets. Choice of wood front: the Slide-A-Shelf standard made-to-fit slide-out shelf is available in your choice of 4 wood fronts to complement your cabinet finish and décor. Birch (pre-finished) Maple (ready to finish) Oak (ready to finish) Poplar (ready to paint) Structure: Slide-A-Shelf standard made-to-fit slide-out shelves are designed with dado and rabbet joint construction for superior strength and are maintenance-free for years of convenience. Installation takes only minutes with a battery-powered Phillips screwdriver. You can find our easy installation guide under the ‘specifications’ below. Solid 9-ply UV cured polyurethane coated birch construction featuring full-extension, heavy-duty ball bearing slides rated for 100 lbs. including the weight of the shelf. Per the detailed measuring instructions; "We will manufacture your slide-outs to the exact dimensions of the opening you provide, with an approximate 1/4 inch clearance of the opening on each side." So, the front wood trim of the shelf will always measure 1/2 inch less than the width of the clear cabinet opening to ensure that it fits the cabinet perfectly. We recommend that you select the clear-width opening of your cabinet. We will manufacture the shelf and rails to fit within the opening. If you were to select 20" as the opening the usable width inside the shelf would be approximately 17 5/8". To remove the slide-out shelf, extend the shelf out, and locate the black levers on each side of the shelf rails. At the same time, push the black levers down on the right side, and up on the left side. The rails should release and you will be able to pull the shelf out of the cabinet.

Upgrade your kitchen storage with the Pull-Out Spice Rack Organizer for Cabinet, a heavy-duty, slide-out drawer system designed to keep your seasonings, herbs, and spice bottles perfectly organized and easily accessible. With a space-saving 2-tier design, smooth gliding rails, and included spice labels, this pull-out organizer transforms your cabinet into a functional, clutter-free storage solution. Built for convenience and durability, this organizer features a sturdy metal frame and high-quality ball-bearing glides that allow the drawer to slide in and out effortlessly, even when fully loaded. No more fumbling through crowded shelves or knocking over spice bottles to reach the one you need—this pull-out drawer brings your entire spice collection right to your fingertips. The 2-tier system maximizes vertical space within your cabinet, allowing you to store up to 30 standard-size spice jars (depending on jar size). The top and bottom tiers are thoughtfully spaced to provide a clear view and quick access to every bottle. Whether you’re storing round jars, square containers, or seasoning packets, this organizer helps streamline your cooking routine by making everything easy to see and grab. Installation is simple and secure. The organizer includes all necessary mounting hardware and instructions, so you can attach it firmly to your cabinet base for stable, long-lasting use. Once installed, the drawer pulls out smoothly without wobbling or tipping, making it a safe and reliable option for everyday kitchen use. To enhance organization further, this spice rack includes a set of preprinted and blank spice labels, allowing you to clearly mark each jar for quick identification. Whether you’re a seasoned chef or a home cook, the labels make it easy to keep track of your ingredients and maintain a tidy, functional kitchen. Perfect for kitchen cabinets, pantry shelves, or under-sink areas, this pull-out spice drawer isn't limited to spices alone — use it to store baking supplies, condiments, vitamins, or small jars and cans. Its sleek, modern design blends well with any kitchen style, while the functionality speaks for itself.

• This rack with the upper tier designed to fit standard spice jars.

Finally, a way to organize and easily access those items hiding under sinks. Lynk Professional’s Two Tier Under Sink Pull Out Organizer features an innovative reversible design that works on either the right or left side of cabinets to fit in those tight spaces around your plumbing under sinks in your kitchen, bathroom, and laundry room. The top shelf includes a durable, removable tray to hold wet sponges and brushes. This pull-out under-cabinet organizer is designed to fit those areas that don’t have the space to use our deep organizers. Lynk’s unique smooth steel welds and beautiful commercial chromed steel construction give you unparalleled strength and durability for a lifetime of trouble-free use. The patented Proglide® industrial-grade ball-bearing glides ensure smooth sliding even under the weight of heavy cleaning supplies. With our proprietary Easy Mount® design, setup is quick and easy because our clever alignment guide does the measuring for you. Lynk Professional’s Sink Shelves are available in different sizes, so we have a sliding under-cabinet organizer to fit your needs. US Patent # 7,810,890 - D547,094 Requires a minimum 12-inch cabinet opening. Hardware included.

• Overall: 11.5'' W x 18'' D

Enhance your cabinets' functionality and preserve a stylish image with the Rev-A-Shelf Chrome Pullout Pantry. The 5700 CR Series is available in a plentiful selection of sizes and is designed on the 250 lb. rated slide system for a quiet glide-out function. This accessory features micro-adjustment door-mounting brackets and top and bottom slide covers for a finished look. The chrome pullout pantries are kit-packaged with the frame, baskets, and door-mounting brackets in one carton.

• Overall: 4.12'' W x 21.62'' D

It was much easier and less time consuming to install than I could have even dreamt! The delivery was a breeze as well!. Matthew. Seattle, WA. 2021-06-18 10:15:17