Showing results for "mixer lift cabinet with drawer"

Save your back and counter space with a Soft-close appliance lift. This hardware provides mechanical assistance for heavy appliances such as a stand mixer. The lift attaches to the interior of the cabinet and attaches to a shelf (not provided). The shelf can be custom-sized to fit any cabinet from a 12" minimum to a 24" maximum. Soft-close dampers ensure slow and smooth closure into the cabinet. Lift locks into place when fully extended. Three spring settings for up to 45 lb weight rating. Can be used in either face frame or frameless cabinetry.

• Overall: 11.5'' W x 20.5'' D

Absolutely best thing I have put in my kitchen. Wife is happy now that she no longer has to move her heavy KitchenAide mixer around when she wants to use it and it is off the counter which helps the appearance. When she uses it she just has to reach down and lift it out with 2 fingers and when she is done she pulls the handle and pushes down slightly and then it takes over and slowly lowers back into the cabinet like magic. A strongly recommended addition for your kitchen, you won’t be disappointed.. Michael. Imperial, MO. 2021-08-13 11:18:56

Rev-A-Shelf® has kept design and flexibility in mind with this heavy-duty appliance lift system. The lifting mechanism makes lifting a heavy or awkward appliance a breeze with its spring-loaded supports and 3 different weight settings. The 1-1/2" thick maple shelf is included and ready to install. Finally, this unit features (2) built-in dampeners that allow this unit to gently glide back inside of your cabinet with very little assistance needed.

• Overall: 15'' W x 23.63'' D

As a wheelchair user, lifting my kitchen aid to set it on the counter was not feasible. Having this lift adds some counter space and makes it accessible.. Allyson. Englewood, CO. 2022-11-14 08:59:55

You love your stand mixer but hate how hard it is to transfer from cabinet storage to the countertop. Experience the ultimate kitchen organization with this Rev-A-Shelf Lift Assist Mechanism. Crafted with care, this product is designed to bring convenience to your home, so you can easily access your bulky appliances with minimal lifting. With flexibility in mind, the heavy-duty chrome appliance riser can be attached to any custom-made shelf, which will fit all Full-height cabinets with a minimum frame opening of 12'' to 21''. Featuring a soft-close dampener, you can adjust the spring tension and hold appliances that weigh up to 60 lb. The soft-close damper allows it to glide back into the cabinet gently and quietly. By installing the spring-loaded bracket kit, you can eliminate the hassle of squatting and lifting heavy appliances like food processors, blenders, and toasters. The Rev-A-Shelf small appliance lift mechanism is a versatile, durable, and convenient solution for your storage needs. It provides an efficient way to maximize your pantry storage and reach appliances with ease. Save your back pain and start mixing with the revolutionary Mechanical Appliance Lift Mechanism from Rev-A-Shelf. Before purchasing, check your cabinet opening to ensure the best fit. Measure side to side, front to back, and top to bottom. Make sure your product is within measurements, and don't forget to take into account any obstructions.

• Overall: 24'' W x 12'' W x 22.5'' D

The Lift System Enhances Utilization of Heavy Kitchen Aid Mixer The kitchen renovation incorporated plans to make better use of the mixer with easier access. The installation was professionally done, although I probably could have completed the hard labor myself (LOL). I am very happy with the outcome and can now enjoy a few more years of use because of the convenience of no longer having to pull it out of a closet or from an awkward shelf. A bonus was to have the fabricator place a pull-out shelf just below the resting position of the Heavy Duty Lift System and it worked out quite well. The bottom-line, if you still enjoy the challenge of fine food preparation and need a little assistance that a mechanism such as this device provides, than you should go for it. It is sturdy, well constructed and easy to utilize. Installation (?), my fabricator said it was a cinch! Bon Appetite! . warren. Mantua, NJ. 2020-06-11 13:35:12

Rev-A-Shelf has kept design and flexibility in mind, the heavy-duty lift can be attached to any custom-made shelf and therefore will fit all full-height cabinet sizes allowing a perfect match to your countertop or interior cabinet. The RAS-ML-HDSC features built-in shock dampeners, and adjustable spring tension, and holds appliances up to 60 lbs. Already regarded as the best in the industry our heavy-duty mixer lift leaps even further ahead of the competition with the addition of soft-close.

• Overall: 5'' H x 5'' W x 5'' D
• Overall Product Weight: 11lb.

*** Note: This product includes only one drawer. A **12-inch width drawer** refers to a drawer box with an **11-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **12 inches of space** for installation. Suitable for **RTA cabinets B15 and pantry cabinets PC15**. A **15-inch width drawer** refers to a drawer box with a **14-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **15 inches of space** for installation. Suitable for **RTA cabinets B18 and pantry cabinets PC18**. An **18-inch width drawer** refers to a drawer box with a **17-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **18 inches of space** for installation. Suitable for **RTA cabinets B21**. **Note:** This cabinet size is not very common. Please carefully measure the **internal width** of your cabinet, not the external width. A **21-inch width drawer** refers to a drawer box with a **20-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **21 inches of space** for installation. Suitable for **RTA cabinets B24 and pantry cabinets PC24**. A **24-inch width drawer** refers to a drawer box with a **23-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **24 inches of space** for installation. Suitable for **RTA cabinets B27**. **Note:** This cabinet size is not very common. Please carefully measure the **internal width** of your cabinet, not the external width. A **27-inch width drawer** refers to a drawer box with a **26-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **27 inches of space** for installation. Suitable for **RTA cabinets B30 and pantry cabinets PC30**. A **30-inch width drawer** refers to a drawer box with a **29-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **30 inches of space** for installation. Suitable for **RTA cabinets B33**. **Note:** This cabinet size is not very common. Please carefully measure the **internal width** of your cabinet, not the external width. A **33-inch width drawer** refers to a drawer box with a **32-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **33 inches of space** for installation. Suitable for **RTA cabinets B36 and pantry cabinets PC36**.

• The drawer uses dovetail joints, which are the strongest connection method available today—much stronger than using nails.
• Solid Wood: This drawer is made of 5/8 inch thick solid wood with an ultra-strong 1/4 inch thick plywood bottom.
• Fully extended ball bearing drawer slides (tracks)

Very important! Please read our detailed measuring guide under 'specifications' before placing your order. This slide-out shelf is custom-made to fit the measurements of your cabinet’s clear opening width and unobstructed interior depth. You will round down and select your closest cabinet opening width and depth measurements from the drop-down menus above. Note: we will manufacture your slide-outs based on the cabinet measurements you select from the drop-down menu. Once installed, your slide-out shelf will have an approximate ¼ - inch clearance on each side for a perfect fit. To begin, first reference the cabinet measuring guide in the 'specifications' section below. All slide-a-shelf cabinet organizers are custom-made to fit your clear cabinet opening width and unobstructed internal depth measurements. Don’t assume measurements. Watch our how-to-measure video and use our measuring guide; cabinets can be constructed in a variety of ways and utilize different hinges/hardware that can impact your measurements. Full extension rails with soft closing feature: the Slide-A-Shelf standard made-to-fit slide-out shelf featured here includes steel full-extension ball-bearing rails with a soft closing feature. It comes fully assembled for quick and easy installation to the base/floor of your cabinet or existing full shelf…an installation template and all hardware are included. This slide-out shelf will fit perfectly and increase the usable storage space of the existing cabinets in your home. They are ideal for your kitchen, pantry, bathrooms, laundry room, linen closet, or garage. Now, you can finally get organized and enjoy the convenience of having all the items you store within easy reach. Say goodbye to messy and cluttered shelves. Unlike other roll-out shelves, all slide-a-shelf models are custom-made to fit your cabinets. Choice of wood front: the Slide-A-Shelf standard made-to-fit slide-out shelf is available in your choice of 4 wood fronts to complement your cabinet finish and décor. Birch (pre-finished) Maple (ready to finish) Oak (ready to finish) Poplar (ready to paint) Structure: Slide-A-Shelf standard made-to-fit slide-out shelves are designed with dado and rabbet joint construction for superior strength and are maintenance-free for years of convenience. Installation takes only minutes with a battery-powered Phillips screwdriver. You can find our easy installation guide under the ‘specifications’ below. Solid 9-ply UV cured polyurethane coated birch construction featuring full-extension, heavy-duty ball bearing slides rated for 100 lbs. including the weight of the shelf. Per the detailed measuring instructions; "We will manufacture your slide-outs to the exact dimensions of the opening you provide, with an approximate 1/4 inch clearance of the opening on each side." So, the front wood trim of the shelf will always measure 1/2 inch less than the width of the clear cabinet opening to ensure that it fits the cabinet perfectly. We recommend that you select the clear-width opening of your cabinet. We will manufacture the shelf and rails to fit within the opening. If you were to select 20" as the opening the usable width inside the shelf would be approximately 17 5/8". To remove the slide-out shelf, extend the shelf out, and locate the black levers on each side of the shelf rails. At the same time, push the black levers down on the right side, and up on the left side. The rails should release and you will be able to pull the shelf out of the cabinet.

The Soft-Close Appliance Lift from Hardware Resources makes it easy to bring heavy appliances to working height and tuck them away when not in use. Designed for heavier countertop appliances such as stand mixers, air fryers, and juicers, this mechanical shelf system keeps countertops clutter-free with dedicated storage space and keeps appliances accessible when needed. The lift mechanism attaches to the interior of the cabinet and is available 3 size options. The soft-close dampers ensure slow and smooth closure into cabinet and is compatible with face frame or frameless cabinetry. Lift locks into place when fully extended, and the lift locks into place when fully extended. Three spring settings allow for use with appliances up to 45 lbs.

• #10 x 3/4" Pan Head Phillips Wood Screws for mounting to cabinet included
• Compatible with both frameless and face frame cabinetry
• Features soft-close dampers for smooth closing
• Provides mechanical assistance for heavy appliances such as a mixer
• Three spring settings for up to 45 lb. capacity

No assembly is required, quick and easy. multiple pre-drilled holes, allowing for side mounting or bottom mounting. **For framed cabinets**: Simply measure the **opening width** of your cabinet and match it to our product dimensions. The included wooden strips will perfectly fill the gaps on both sides of the slides inside the cabinet. **For frameless cabinets**: Measure the **internal width** of the cabinet and subtract the total width of the wooden strips on both sides (1.5 inches). match the adjusted measurement to our product dimensions when ordering. **Note**: The total width of our drawers includes the slide width but does not include the width of the wooden strips. This design ensures a **perfect fit** for both framed and frameless cabinets, providing a seamless and professional installation experience. Components include: soft close sliding drawer assembly slide rail is a fully extended ball bearing drawer slide rail, mounting screws x 4, fixed wooden strips x 2 organizers natural wood color solid wood construction natural wood color is perfect for kitchen, bathroom, laundry room, and utility room storage. Soft close slider 45 mm slider: this roll-out drawer for the cabinet includes 20-inch full extension drawer slides (side-mounted) this wood drawer opens smoothly, and the drawer fully extends for easy access to cookware, small appliances, non-perishables, and more. Made entirely of wood installs easily no nails and glue are necessary. This cabinet pull-out tray is good for pantry, vanities, and under sinks. CabinetRTA, pull-out, wood drawer, box, pull-out, cabinet, organize, cabinet pull-out organizers, kitchen, bathroom, laundry, room, utility room, storage, very good pantry, vanities, under the sink. Bedroom, offices, bathroom storage.

Very Important! Please Read Our Detailed Measuring Guide Under 'Specification' Before Placing Your Order. This slide-out shelf is custom-made to fit the measurements of your cabinet’s clear opening width and unobstructed interior depth. You will round down and select your closest cabinet opening width and depth measurements from the drop-down menus above. Note: we will manufacture your slide-outs based on the cabinet measurements you select from the drop-down menu. Once installed, your slide-out shelf will have an approximate ¼ - inch clearance on each side for a perfect fit. To begin, first reference the cabinet measuring guide in the 'specifications' section below. All slide-a-shelf cabinet organizers are custom-made to fit your clear cabinet opening width and unobstructed internal depth measurements. Don’t assume measurements. Watch our how-to-measure video and use our measuring guide; cabinets can be constructed in a variety of ways and utilize different hinges/hardware that can impact your measurements. Full extension rails: the Slide-A-Shelf standard made-to-fit slide-out shelf featured here includes steel full-extension ball-bearing rails. It comes fully assembled for quick and easy installation to the base/floor of your cabinet or existing full shelf…an installation template and all hardware are included. This slide-out shelf will fit perfectly and increase the usable storage space of the existing cabinets in your home. They are ideal for your kitchen, pantry, bathrooms, laundry room, linen closet, or garage. Now, you can finally get organized and enjoy the convenience of having all the items you store within easy reach. Say goodbye to messy and cluttered shelves. Unlike other roll-out shelves, all slide-a-shelf models are custom-made to fit your cabinets. Choice of wood front: the Slide-A-Shelf standard made-to-fit slide-out shelf is available in your choice of 4 wood fronts to complement your cabinet finish and décor. Birch (pre-finished) Maple (ready to finish) Oak (ready to finish) Poplar (ready to paint) Structure: Slide-A-Shelf standard made-to-fit slide-out shelves are designed with dado and rabbet joint construction for superior strength and are maintenance-free for years of convenience. Installation takes only minutes with a battery-powered Phillips screwdriver. You can find our easy installation guide under the ‘specifications’ below.

• Overall: 5.5'' W x 19.5'' D

Conveniently pack away all of your cleaning supplies with the Cabinet Storage Organizer by Rev-A-Shelf. This reliable organizer is perfect for storing supplies in a convenient spot under the sink whether it be in the bathroom or kitchen. This storage option is constructed out of natural maple wood with a UV cured semi-gloss finish for durability and to stop scratches. The premium chrome rails secure all your cleaning supplies from falling out as your open or close the door. This set includes hardware to make installation and removal quick, easy, and painless. The package includes the L-Shaped wood organizer, soft-close slides, 6 acrylic bins, and mounting hardware. Double check your cabinet's opening to allow the best fit. Measure side to side, front to back, and top to bottom. Double check to make sure your product is within measurements and don't forget to take into account any obstructions. Whether it's going under the sink in the bathroom, kitchen, or garage the Cabinet Storage Organizer by Rev-A-Shelf has you covered.

• Overall: 8.75'' W x 18.75'' D

Bought four of them for our master bathroom vanity since they are narrow cabinets with obstructive plumbing and these were perfect! They totally navigate the pipes and are a much better use of the cabinet space compared to just throwing everything in there and hoping it all fits properly. There was truly no other off-the- shelf storage solution that worked for this tight space. Installation was very easy although the paper template didn't exactly line up with all the slider frames so use the frame itself as the template and mark the holes accordingly for more accurate hole locations and ease of installation. Great product overall and very clever! Note: these are the smaller of the two sizes available. . Andrew. San Diego, CA. 2020-05-05 18:43:00

Upgrade and maximize your kitchen cabinets with this Rev-A-Shelf 2-Tier Wire Pullout Cabinet Drawer Basket, an ideal addition for your kitchen, pantry, bathroom, under the sink cabinet, and more. The key to this system is an extending ball-bearing system that allows you to smoothly Pullout what you need. The system is strong enough to hold up to 100 lb, making it a great way to hold heavier appliances that would otherwise be difficult to Pullout of a cabinet. To install this storage organizer system, drill 4 screws to connect the base to the bottom of your cabinet. All the required mounting hardware is included (optional cabinet door mounting kit, 5WB-DMKIT, sold separately). Made with durable construction, this Pullout shelf organizer is your excellent and ideal choice that can last for years to come. Double check your cabinet's opening to allow the best fit. Measure side to side, front to back, and top to bottom. Double check your product is within measurements, and don't forget to account for any obstructions. Make the most of your cabinet space with the Rev-A-Shelf 2-Tier Wire Pullout Cabinet Drawer Basket.

• Overall: 22'' W x 17.75'' D

This product is very high quality. The material is sturdy and it is not flimsy at all. It was very easy to install. My cabinet is frameless and it measures 18 14 W X 23 14 D and 23 12 H and it fits perfectly. I recommend this product because it makes it easy to get the items in the far back. My wife loves it.. Victor. CA. 2020-10-06 02:43:19

Easily access to pots, pans, lids, bottles, stand mixers, and other kitchen accessories with this single sliding basket kitchen storage organizer, the Rev-A-Shelf Kitchen Cabinet Pullout Wire Basket. This wire Pullout basket installs quickly and easily on the bottom of your kitchen cabinet. With smooth ball-bearing slides, the sturdy base stays in place as you pull out the basket. This kitchen organizer is strong enough to hold up to 100 pounds allowing you to organize most of your kitchen essentials and allowing them to be easy to get to. Once installed, the basket and Hardware frame measure 18 in. deep, 8.5 in. wide, and 5.56 in. tall. This kitchen cabinet organizer is designed to fit 12 in. cabinets with 8.5 in. openings, ideal for maximizing space under the sink or in vanity cabinets. This kitchen cabinet Pullout organizer comes with mounting hardware. The optional Door Mount kit (5WB-DMKIT) is sold separately. Double check your cabinet's opening to allow the best fit. Measure side to side, front to back, and top to bottom. Double check to ensure your product is within measurements, and don't forget to account for any obstructions. Simplify your kitchen cabinets without having to adapt to a complicated organization system with the Rev-A-Shelf Kitchen Cabinet Pullout Wire Basket.

• Overall: 18'' W x 20'' D

I love these rev-a-shelves. I got two to help organize my pots and pan cabinet. Worked out perfectly.. Maryann. Bethlehem, PA. 2023-03-19 07:44:19