Showing results for "swing out cabinet shelf"

Rev-A-Shelf® introduces the 4WP Series Swing-Out Wood Pantry System. Created for both base and tall 36" pantry cabinets, the series features amenities the competitors just don't offer: from an industrial piano hinge, adjustable inside door and pantry shelves with chrome rails, to the flexibility of being able to add or remove stylish chrome bars to the top of the units for additional shelf space on both doors and swing-out pantry. The solid construction consists of 1/2" maple wood that has a UV-cured, clear finish to ensure a beautiful match to any cabinet. The complete kit includes two swing-out units and two door storage units with adjustable mounting brackets.

• Included: (2) Wood swing out pantries
• (2) Door-Mount units with (6) adjustable shelves and mounting hardware
• Due to size/weight item normally ships via LTL carrier
• Minimum cabinet height without top rails is 52
• NOTE: These pantry kits are typically installed in custom built cabinets and you should refer to your designer/builder before ordering

Above your refrigerator or oven is one of the hardest places to reach, in the back of that cabinet. Well, Rev-A-Shelf has fixed this by designing the above appliance pullout organizer. This unit requires a 24"-deep cabinet but will bring the hard-to-reach items to your fingertips.

• Overall: 13'' W x 19'' D

Very flexible. Alethea. NY. 2021-09-16 14:30:03

No assembly is required, quick and easy. multiple pre-drilled holes, allowing for side mounting or bottom mounting. **For framed cabinets**: Simply measure the **opening width** of your cabinet and match it to our product dimensions. The included wooden strips will perfectly fill the gaps on both sides of the slides inside the cabinet. **For frameless cabinets**: Measure the **internal width** of the cabinet and subtract the total width of the wooden strips on both sides (1.5 inches). match the adjusted measurement to our product dimensions when ordering. **Note**: The total width of our drawers includes the slide width but does not include the width of the wooden strips. This design ensures a **perfect fit** for both framed and frameless cabinets, providing a seamless and professional installation experience. Components include: soft close sliding drawer assembly slide rail is a fully extended ball bearing drawer slide rail, mounting screws x 4, fixed wooden strips x 2 organizers natural wood color solid wood construction natural wood color is perfect for kitchen, bathroom, laundry room, and utility room storage. Soft close slider 45 mm slider: this roll-out drawer for the cabinet includes 20-inch full extension drawer slides (side-mounted) this wood drawer opens smoothly, and the drawer fully extends for easy access to cookware, small appliances, non-perishables, and more. Made entirely of wood installs easily no nails and glue are necessary. This cabinet pull-out tray is good for pantry, vanities, and under sinks. CabinetRTA, pull-out, wood drawer, box, pull-out, cabinet, organize, cabinet pull-out organizers, kitchen, bathroom, laundry, room, utility room, storage, very good pantry, vanities, under the sink. Bedroom, offices, bathroom storage.

Swing Left Blind Corner Kitchen Cabinet Pull Out Organizer for 36", 2 Tier Swing Tray, Soft Close Blind Organizer for Right Handed Open Blind Kitchen Cabinet

Maximize pantry cabinet space with a pantry swingout. Designed to use in a pantry cabinet with recessed center divider and half shelves, the swingout is mounted on the center divider in front of the shelves and the piano hinge allows the shelves to swing out of the way to access the back shelves. Each side has five shelves, two of which are adjustable. Beautiful birch wood matches cabinet interiors.

• Overall Depth - Front to Back: 8''

This is exactly what I needed!!. Linda. Houston, TX. 2022-01-17 19:35:27

Upgrade and maximize your kitchen cabinets with this Rev-A-Shelf 2-Tier Wire Pullout Cabinet Drawer Basket, an ideal addition for your kitchen, pantry, bathroom, under the sink cabinet, and more. The key to this system is an extending ball-bearing system that allows you to smoothly Pullout what you need. The system is strong enough to hold up to 100 lb, making it a great way to hold heavier appliances that would otherwise be difficult to Pullout of a cabinet. To install this storage organizer system, drill 4 screws to connect the base to the bottom of your cabinet. All the required mounting hardware is included (optional cabinet door mounting kit, 5WB-DMKIT, sold separately). Made with durable construction, this Pullout shelf organizer is your excellent and ideal choice that can last for years to come. Double check your cabinet's opening to allow the best fit. Measure side to side, front to back, and top to bottom. Double check your product is within measurements, and don't forget to account for any obstructions. Make the most of your cabinet space with the Rev-A-Shelf 2-Tier Wire Pullout Cabinet Drawer Basket.

• Overall: 22'' W x 17.75'' D

This product is very high quality. The material is sturdy and it is not flimsy at all. It was very easy to install. My cabinet is frameless and it measures 18 14 W X 23 14 D and 23 12 H and it fits perfectly. I recommend this product because it makes it easy to get the items in the far back. My wife loves it.. Victor. CA. 2020-10-06 02:43:19

Very Important! Please Read Our Detailed Measuring Guide Under 'Specification' Before Placing Your Order. This slide-out shelf is custom-made to fit the measurements of your cabinet’s clear opening width and unobstructed interior depth. You will round down and select your closest cabinet opening width and depth measurements from the drop-down menus above. Note: we will manufacture your slide-outs based on the cabinet measurements you select from the drop-down menu. Once installed, your slide-out shelf will have an approximate ¼ - inch clearance on each side for a perfect fit. To begin, first reference the cabinet measuring guide in the 'specifications' section below. All slide-a-shelf cabinet organizers are custom-made to fit your clear cabinet opening width and unobstructed internal depth measurements. Don’t assume measurements. Watch our how-to-measure video and use our measuring guide; cabinets can be constructed in a variety of ways and utilize different hinges/hardware that can impact your measurements. Full extension rails: the Slide-A-Shelf standard made-to-fit slide-out shelf featured here includes steel full-extension ball-bearing rails. It comes fully assembled for quick and easy installation to the base/floor of your cabinet or existing full shelf…an installation template and all hardware are included. This slide-out shelf will fit perfectly and increase the usable storage space of the existing cabinets in your home. They are ideal for your kitchen, pantry, bathrooms, laundry room, linen closet, or garage. Now, you can finally get organized and enjoy the convenience of having all the items you store within easy reach. Say goodbye to messy and cluttered shelves. Unlike other roll-out shelves, all slide-a-shelf models are custom-made to fit your cabinets. Choice of wood front: the Slide-A-Shelf standard made-to-fit slide-out shelf is available in your choice of 4 wood fronts to complement your cabinet finish and décor. Birch (pre-finished) Maple (ready to finish) Oak (ready to finish) Poplar (ready to paint) Structure: Slide-A-Shelf standard made-to-fit slide-out shelves are designed with dado and rabbet joint construction for superior strength and are maintenance-free for years of convenience. Installation takes only minutes with a battery-powered Phillips screwdriver. You can find our easy installation guide under the ‘specifications’ below.

• Overall: 5.5'' W x 19.5'' D

Rev-A-Shelf® has kept design and flexibility in mind with this heavy-duty appliance lift system. The lifting mechanism makes lifting a heavy or awkward appliance a breeze with its spring-loaded supports and 3 different weight settings. The 1-1/2" thick maple shelf is included and ready to install. Finally, this unit features (2) built-in dampeners that allow this unit to gently glide back inside of your cabinet with very little assistance needed.

• Overall: 15'' W x 23.63'' D

As a wheelchair user, lifting my kitchen aid to set it on the counter was not feasible. Having this lift adds some counter space and makes it accessible.. Allyson. Englewood, CO. 2022-11-14 08:59:55

Very important! Please read our detailed measuring guide under 'specifications' before placing your order. This slide-out shelf is custom-made to fit the measurements of your cabinet’s clear opening width and unobstructed interior depth. You will round down and select your closest cabinet opening width and depth measurements from the drop-down menus above. Note: we will manufacture your slide-outs based on the cabinet measurements you select from the drop-down menu. Once installed, your slide-out shelf will have an approximate ¼ - inch clearance on each side for a perfect fit. To begin, first reference the cabinet measuring guide in the 'specifications' section below. All slide-a-shelf cabinet organizers are custom-made to fit your clear cabinet opening width and unobstructed internal depth measurements. Don’t assume measurements. Watch our how-to-measure video and use our measuring guide; cabinets can be constructed in a variety of ways and utilize different hinges/hardware that can impact your measurements. Full extension rails with soft closing feature: the Slide-A-Shelf standard made-to-fit slide-out shelf featured here includes steel full-extension ball-bearing rails with a soft closing feature. It comes fully assembled for quick and easy installation to the base/floor of your cabinet or existing full shelf…an installation template and all hardware are included. This slide-out shelf will fit perfectly and increase the usable storage space of the existing cabinets in your home. They are ideal for your kitchen, pantry, bathrooms, laundry room, linen closet, or garage. Now, you can finally get organized and enjoy the convenience of having all the items you store within easy reach. Say goodbye to messy and cluttered shelves. Unlike other roll-out shelves, all slide-a-shelf models are custom-made to fit your cabinets. Choice of wood front: the Slide-A-Shelf standard made-to-fit slide-out shelf is available in your choice of 4 wood fronts to complement your cabinet finish and décor. Birch (pre-finished) Maple (ready to finish) Oak (ready to finish) Poplar (ready to paint) Structure: Slide-A-Shelf standard made-to-fit slide-out shelves are designed with dado and rabbet joint construction for superior strength and are maintenance-free for years of convenience. Installation takes only minutes with a battery-powered Phillips screwdriver. You can find our easy installation guide under the ‘specifications’ below. Solid 9-ply UV cured polyurethane coated birch construction featuring full-extension, heavy-duty ball bearing slides rated for 100 lbs. including the weight of the shelf. Per the detailed measuring instructions; "We will manufacture your slide-outs to the exact dimensions of the opening you provide, with an approximate 1/4 inch clearance of the opening on each side." So, the front wood trim of the shelf will always measure 1/2 inch less than the width of the clear cabinet opening to ensure that it fits the cabinet perfectly. We recommend that you select the clear-width opening of your cabinet. We will manufacture the shelf and rails to fit within the opening. If you were to select 20" as the opening the usable width inside the shelf would be approximately 17 5/8". To remove the slide-out shelf, extend the shelf out, and locate the black levers on each side of the shelf rails. At the same time, push the black levers down on the right side, and up on the left side. The rails should release and you will be able to pull the shelf out of the cabinet.

Reach the top shelf with ease thanks to Rev-A-Shelf Chrome Convenient Wall Cabinet Pulldown Shelf System. This Pulldown Shelf Organizer is guaranteed to rid of your kitchen mess, giving you a seamless organization system. Bring hard-to-reach items down to you with this convenient Two-Tier cabinet Pulldown system. This functional drop-down shelf basket features a unique gas-assisted lifting/lowering mechanism that provides unparalleled stability through the entire range of motion. The Pulldown shelf for upper cabinets locks in the down position so you can reach everything in your wall cabinet hands-free. Support your favorite snacks, extra linens, supplies, and more in this helpful organizer. This package includes (1) Pulldown shelving system and mounting hardware for easy installation. You can easily mount your shelves to the floor or side of a cabinet. The heavy gauge wire construction provides extra durability and elegance for long-lasting use. Double check your cabinet's opening to allow the best fit. Measure side to side, front to back, and top to bottom. Double check to make sure your product is within measurements and don't forget to take into account any obstructions. Bring things to you with Rev-A-Shelf Convenient Cabinet Pulldown Shelf.

• Overall Depth - Front to Back: 10.25''

Unfortunately, it didnt serve the purpose of letting my mom reach the items in the high-up kitchen cabinets, since the pull-down bar sits just above the cabinet floor (if you mount it to the cabinet base). It definitely cant be overflowing or overloaded since its moving up and down. Theres not much to be done with that, although I probably would have liked the back wall of the shelves to go up higher. Overall, Im pretty satisfied, although it didnt make all my dreams come true. Laura. Portland, OR. 2021-04-19 00:43:22

*** Note: This product includes only one drawer. A **12-inch width drawer** refers to a drawer box with an **11-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **12 inches of space** for installation. Suitable for **RTA cabinets B15 and pantry cabinets PC15**. A **15-inch width drawer** refers to a drawer box with a **14-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **15 inches of space** for installation. Suitable for **RTA cabinets B18 and pantry cabinets PC18**. An **18-inch width drawer** refers to a drawer box with a **17-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **18 inches of space** for installation. Suitable for **RTA cabinets B21**. **Note:** This cabinet size is not very common. Please carefully measure the **internal width** of your cabinet, not the external width. A **21-inch width drawer** refers to a drawer box with a **20-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **21 inches of space** for installation. Suitable for **RTA cabinets B24 and pantry cabinets PC24**. A **24-inch width drawer** refers to a drawer box with a **23-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **24 inches of space** for installation. Suitable for **RTA cabinets B27**. **Note:** This cabinet size is not very common. Please carefully measure the **internal width** of your cabinet, not the external width. A **27-inch width drawer** refers to a drawer box with a **26-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **27 inches of space** for installation. Suitable for **RTA cabinets B30 and pantry cabinets PC30**. A **30-inch width drawer** refers to a drawer box with a **29-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **30 inches of space** for installation. Suitable for **RTA cabinets B33**. **Note:** This cabinet size is not very common. Please carefully measure the **internal width** of your cabinet, not the external width. A **33-inch width drawer** refers to a drawer box with a **32-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **33 inches of space** for installation. Suitable for **RTA cabinets B36 and pantry cabinets PC36**.

• The drawer uses dovetail joints, which are the strongest connection method available today—much stronger than using nails.
• Solid Wood: This drawer is made of 5/8 inch thick solid wood with an ultra-strong 1/4 inch thick plywood bottom.
• Fully extended ball bearing drawer slides (tracks)

This wood shed & outdoor is an ideal space to have in your garden. Our vertical shed is a great place to store tools, garden equipment, or any items you need to store with its spacious space and layered design. Made from sturdy and stable fir wood, our tool storage has 2 magnetic latched doors and weather-coating protection that provide a long service lifespan. Finally, our outdoor storage cabinet features a built-in work table, making your garden incredibly multi-functional. Check out this potting bench and backyard storage shed today.

• Storage Capacity: 199.48cubic feet
• Wind Rating: 0Miles Per Hour

Love this piece for our back deck. We replaced a bakers rack with this, it “hides” our stuff well and is just fine under a covered patio. Pretty simple to put together, read the directions carefully as we had to undo steps because pieces were upside down.. Susan. Indianapolis, IN. 2021-08-29 11:39:36