Showing results for "universal bed frame"

Anchor your mattress in your master suite or guest room with this low-profile bed frame. Crafted from heavy-duty steel in a powder-coated finish, this bed frame strikes a simple rectangular silhouette. A series of metal slats accommodate your memory foam, latex, or traditional spring mattress (sold separately), while short legs create just enough clearance for convenient under-bed storage. This frame is designed to easily attach to your own standard-sized headboard using predrilled holes in two of the legs.

• Product Type: Bed Frame
• Material: Steel
• Box Spring Required: Yes
• Clearance - Floor to Bottom: 5''
• Number of Bed Frame Legs Included: 6

A heavy-duty bed frame that will fit Queen bolt-on style headboards & footboards. You must have a headboard and footboard to use this frame. This frame requires a box spring or foundation. The queen-sized frame will have five (5) legs with the included center bar. The center bar for this frame is used side-to-side for queen bedding. This means this frame is not recommended for use with a split (2 pieces) box spring. The legs will adjust the frame height from 5 3/4" to 9 1/4" off the floor. The steel in this frame is a high strength, high carbon, hot-rolled steel. It is rolled using 97% recycled material producing a very strong and environmentally-friendly product. This frame utilizes a bolt-together assembly, which allows it to be adjusted to accommodate a wider variety of headboards and footboards. The frame simply bolts together through slots and holes in the rails with the provided hardware and tools at the correct width for the bedding being used. The brackets for the headboard and footboard can be quickly mounted to the frame using the provided tools and hardware. This allows for maximum adjustability to ensure that the frame will fit the width and height of your bed perfectly.

• Product Type: Bed Frame
• Material: Steel
• Box Spring Required: Yes
• Clearance - Floor to Bottom: 9''
• : Yes

A made-in-the-USA, heavy-duty bed frame that will fit full (double), queen, and king(eastern king) bedding. This is a headboard-only frame and will not accommodate a footboard. This frame requires the use of a foundation or box spring. This heavy-duty frame has six (6) legs that utilize our uniquely designed glides. The frame using these glides has been tested with a 2000-pound load. Guaranteeing the structural integrity of the part is perfectly consistent from one part to the next. The glides are stronger than a wheel while maintaining the same or better mobility. These glides are safe on all flooring surfaces. They will not mark or scuff a wood floor like wheels. The 2-inch wide center support on this frame is used head-to-toe on the king and full sizes. It can be used either head-to-toe or side-to-side on a queen size. This makes it perfect for split queen foundations. This frame sits approximately 7 1/2" off the floor. If no headboard is used, the headboard brackets can be left off and the bed centered on the frame, assuring that the frame cannot bump and damage the wall. All tools are included for a simple, quick, trouble-free assembly process. This frame uses our Instamatic assembly. This is a keyhole/riveted design that allows the frame to be set up and locked together without the use of tools and hardware. Headboard brackets are included and must be bolted onto the frame to ensure maximum adjustability to fit all designs of headboards. The headboard brackets are adjustable in both height and width and have 2 1/2" and 4"-hole centers. All hardware and tools required for mounting the frame to a headboard are included. The steel in this frame is a high strength, high carbon, hot-rolled steel. It is 100% average of 97% recycled material, which makes this frame a heavy-duty, environmentally friendly product.

• Adjustable to fit Full(double), Queen, and Standard King(Eastern King) Bedding
• The two-leg center bar for added support
• The diameter of the bottom of the 4 black glides the part that sits on the floor is 3
• Headboard only, will not work with a footboard.
• Maximum width for box springs - Full 53" - Queen 60" - King 76

Really Nice Bed Frame. My old bed frame had wheels and constantly moved. This is very sturdy and can not be moved easily. I love the feet that do not damage my tile floor. It was easy to put together, came on the day promised and looks just like the picture. I would recommend this bed frame. I am happy with the purchase.. Sandra. Ormond Beach, FL. 2023-03-03 07:55:08

• Product Type: Bed Frame
• Material: Metal
• Box Spring Required: Yes
• Clearance - Floor to Bottom: 5.75''
• Number of Bed Frame Legs Included: 9

Elevate your sleep experience with the Wayfair Sleep easy assembly metal box spring. Designed to combine the timeless appeal of a traditional box spring with enhanced stability and durability, this heavy-duty box spring is crafted from robust steel that ensures enduring performance. Offered in three profiles, that fit all your needs perfectly: For kids, guests, dorms, and secondary bedrooms; offers improved shock absorption and superior ventilation, contributing to your comfort throughout the night. All profiles boast a neutral cover that not only adds a touch of elegance but also features non-slip and elastic straps for effortless attachment and removal. Assembling your sleep foundation is a breeze with our easy-to-follow, step-by-step instructions and comprehensive tool kit included in the package. Simply take it out of the box, assemble and top it with the mattress of your choice. Plus, your investment is secured by a generous 5-year manufacturer's warranty, offering you peace of mind and ensuring long-lasting satisfaction. (Mattress, headboard and bed frame sold separately.)

• size note: Our boxspring is slightly smaller than the standard size, in order to fit perfectly into the bed frame.

• Headboard Bracket Compatible: Yes

This is a heavy-duty tall bed frame that will fit full (double) and queen bedding. This frame requires the use of a foundation or box spring. This frame is not compatible with a footboard. This heavy-duty frame has seven (7) legs that utilize our uniquely designed glides. The frame using these glides has been tested with a 2000-pound load. Guaranteeing the structural integrity of the part is perfectly consistent from one part to the next. The glides are stronger than a wheel while maintaining the same or better mobility. These glides are safe on all flooring surfaces. They will not mark or scuff a wood floor like wheels. The 2-inch wide center support on this frame is used head-to-toe on the king and full sizes. It can be used either head-to-toe or side-to-side on a queen size. This makes it perfect for split queen foundations. This frame sits approximately 10 1/2" off the floor leaving ample space for storage under the bed. If no headboard is used, the headboard brackets can be left off and the bed centered on the frame, assuring that the frame cannot bump and damage the wall. All tools are included for a simple, quick, trouble-free assembly process. This frame uses our Instamatic assembly. This is a keyhole/riveted design that allows the frame to be set up and locked together without the use of tools and hardware. Headboard brackets are included and must be bolted onto the frame to ensure maximum adjustability to fit all designs of headboards. The headboard brackets are adjustable in both height and width and have 2 1/2" and 4"-hole centers. All hardware and tools required for mounting the frame to a headboard are included. The steel in this frame is a high strength, high carbon, hot-rolled steel. It is 100% average of 97% recycled material, which makes this frame a heavy-duty, environmentally friendly product.

• Heavy Duty
• High profile to allow for storage space under the bed and raise overall height

Maybe my expectations were too high but I bought this frame because it looked sturdier than most and offered the higher clearance I sought. In the end, while it does the job, the bed does shimmy when someone moves in it. That may just be the curse of a simple metal frame but this one looked like it was all steel and made to be better. In fact, the four corner legs are two-piece, with a plastic foot that the frame sits in, and this seems to create a flex point that allows for the shimmy movement. I might return it but then I'd have to pay $40.... If you're as sensitive a sleeper I am, I suggest getting something more solid.. Gina. Eden Prairie, MN. 2023-05-01 12:25:04

Set a modern and minimalist foundation in your restful retreat with this clean-lined platform bed frame. Crafted from metal, this platform bed features a system of slats to prop up your preferred mattress without the help of a box spring for a low-profile look. Understated black finish outfits this design, ensuring it can complement any color palette you dream up.

• Product Type: Bed Frame
• Material: Steel
• Headboard Bracket Compatible: Yes
• Clearance - Floor to Bottom: 12''

The Inst-a-matic® bed frame is an extra heavy-duty bed frame that is one of the most durable, well-made bed frames on the market today. Made of heavy-duty high carbon, recycled railroad rails with a water-based, lead-free finish. The unique wedge lock leg design becomes even stronger with use. Oversized side rails provide additional support. Solid rivet construction increases durability. Rounded corners provide safety and the recessed leg design offers additional toe room. The product is easy to assemble with no tools required. Includes rollers that can be used on carpet or hard-surfaced floors. 4,000 lb. weight capacity.

• Box Spring Required: Yes
• Casters / Wheels: Yes
• Overall Height - Top to Bottom: 7.5''

It's very well made and sturdy but the casters are junk and likely won't spin properly so I suggest do NOT insert them into the frame because you will not be able to remove the plastic inserts once they're pushed in and then you won't have the ability to install better casters. They are called "Stem Casters" and the stem length is 1.77" long and .5" wide including the plastic insert. Do what I did and buy expensive stem casters separately according to the dimensions I provided. That'll be the only way you will be guaranteed a finished bed that'll roll easily. Frame is ultra sturdy but if you're overweight or have multiple simultaneous partners, there are other frames with NINE legs available elsewhere for even greater weight support. But for 2 people with a combined weight of 375 lbs, 6 legs is sufficient. Be forewarned, avoid these cheap casters and get better ones. There are NO bed frames sold with better casters - you have to improve it on your own. This is a good base frame to start from. Spend an extra hundred for quality casters and you won't regret it. Hint: IF you avoided my suggestion and installed these cheap plastic inserts and found the caster wouldn't spin, you can remove the plastic insert by drilling it out with a .5" drill bit OR use a torch to heat the legs until the plastic tube melts out. Be advised, either of these methods will void the warranty.. Anthony. US. 2022-10-10 17:24:04

This modern platform bed frame is a classic design. Premium linen blend fabric that is easy to clean but soft to the touch. Visible woven fabric details add a layer of dimension for a custom feel. Reinforced with solid wood legs, metal center support legs, and an engineered curved slat system this bed is built to last. This type of slat system can better adjust to your body's weight and movement, offering improved comfort and support. The shape and tension of the planks also help to reduce strain on your mattress, improving its overall lifespan.

• Easy assembly. Tools and hardware included. Additional tools required but not included: screwdriver.
• Solid cream-colored fabric with a visible woven linen design.
• Spot clean fabric with warm water.
• A 10” mattress is recommended. The mattress is sold separately.

A heavy-duty bed frame that will fit twin and full bolt-on style headboards & footboards. You must have a headboard and footboard to use this frame. This frame requires a box spring or foundation. The twin/full-frame has four (4) legs with adjustable height glides. The legs will adjust the frame height from 5 3/4" to 9 1/4" off the floor. The steel in this frame is a high strength and high carbon. It is rolled using 97% recycled material producing a very strong and environmentally-friendly product. This frame utilizes a bolt-together assembly, which allows it to be adjusted to accommodate a wider variety of headboards and footboards. The frame simply bolts together through slots and holes in the rails with the provided hardware and tools at the correct width for the bedding being used. The brackets for the headboard and footboard can be quickly mounted to the frame using the provided tools and hardware. This allows for maximum adjustability to ensure that the frame will fit the width and height of your bed perfectly.

• Box Spring Required: Yes
• Clearance - Floor to Bottom: 9''
• : Yes
• Overall: 9.25'' H x 54'' W x 76'' L
• Overall Product Weight: 26lb.

This sturdy platform bed is the ultimate support system crafted with 100% steel and patented wide steel slats anchored by heavy-duty steel legs to soundly support both you and your mattress. The clean and simple edges create a modern design, perfect for minimalists. To save you as much space as possible, it also includes 11 inches of under-bed storage. What's more, this bed requires no additional tools and can be easily assembled within minutes. This design includes slots on the legs to be paired with any headboard.

• Product Type: Bed Frame
• Material: Steel
• Headboard Bracket Compatible: Yes
• Clearance - Floor to Bottom: 11''