Showing results for "universal bed frame brackets"

A heavy-duty bed frame that will fit Queen bolt-on style headboards & footboards. You must have a headboard and footboard to use this frame. This frame requires a box spring or foundation. The queen-sized frame will have five (5) legs with the included center bar. The center bar for this frame is used side-to-side for queen bedding. This means this frame is not recommended for use with a split (2 pieces) box spring. The legs will adjust the frame height from 5 3/4" to 9 1/4" off the floor. The steel in this frame is a high strength, high carbon, hot-rolled steel. It is rolled using 97% recycled material producing a very strong and environmentally-friendly product. This frame utilizes a bolt-together assembly, which allows it to be adjusted to accommodate a wider variety of headboards and footboards. The frame simply bolts together through slots and holes in the rails with the provided hardware and tools at the correct width for the bedding being used. The brackets for the headboard and footboard can be quickly mounted to the frame using the provided tools and hardware. This allows for maximum adjustability to ensure that the frame will fit the width and height of your bed perfectly.

• Product Type: Bed Frame
• Material: Steel
• Box Spring Required: Yes
• Clearance - Floor to Bottom: 9''
• : Yes

#69 Bolt-On to Down Hook-On Conversion Brackets for Headboard Attachment The #69 Bolt-On to Down Hook-On Bed Frame Conversion Bracket provides vertical and/or width adjustment. This bracket is sold as a set of 2, so if you have a headboard and footboard, you will need two sets. The #69 conversion bracket comes with two #69 brackets, nuts, bolts, and screws. The #69 bracket is used when you need vertical and/or width adjustment for your bed rails to fit your headboard. The hooks on the #69 are pointed down. The #69 bracket should be used when your headboard and/or footboard can take the weight of your bed. The #69 conversion bracket should be the one for you if you need both height and/or width adjustment. Converts a bolt-on bed frame to allow for a hook-on type headboard Allows easy conversion from bolt-on to hook-on brackets This product is sold in pairs. To attach your headboard AND footboard, you would need two pairs Approximate Measurements - Height: 7-3/8", Width: 2-3/8", Depth of Hook: 1-1/4", Overall Bracket Depth: 1-3/8" There are other types of Bolt-On to Hook-On Conversion Brackets with the included hardware: The #35 Hook Plate Conversion Adapter Kit for Using a Bolt-On Frame with a Hook-On Headboard comes as a set of 4, enough for both the headboard and footboard. If you need a straight connection from the bedrail to the headboard and footboard, the #35 should be a perfect fit.

• Converts a bolt-on bed frame to allow for a hook-on type headboard
• Allows easy conversion from bolt-on to hook-on brackets
• This product is sold in pairs. To attach your headboard AND footboard, you would need two pairs

Made from recycled railroad steel, these support trails provide an alternative to traditional wooden slats. Three metal rails and three legs complete this set, though additional slats can be used, depending on your preference. An adjustable support system and height make this piece adaptable to your style of bed frame. Plus, they’re foldable for easy storage. This item does not include side rails or a headboard. A box spring is required.

• : 21lb.
• : 3 metal support rails, 3 legs
• : 6'' H x 78'' W x 1.25'' L
• : No tools required
• : Yes

This set comes with two headboard/footboard brackets to allow headboard or footboard attachment to your frame. Customize your Smart base frame with these strong and easy-to-use brackets. Metal bed frame sold separately.

• Product Type: Bed Frame Brackets
• Overall: 5'' W x 5'' L
• Weight Capacity: 0lb.

This accessory item is to be used with the Hollywood Bed Frame EnForce® Platform Base, to attach a headboard or footboard. 2 brackets are included in the box. If you plan to attach a Headboard and Footboard, you would need to order 2 units.

• Product Type: Bed Frame Brackets
• Overall: 5.5'' H x 5'' W x 5.5'' L
• Weight Capacity: 100lb.

The Structures Queen modification plate is designed to attach Queen bed frames to Full headboards or Full bed frames to Queen headboards. This modification plate is perfect for special projects or unique headboard sizes. Steel construction creates a heavy-duty connection. The set includes two modification plates, and to attach both a headboard and a footboard you’ll need two sets. When installing, be sure to orient the plates so no excess hangs off the edge of the headboard or in a way that can cause a hazard in your bedroom.

• Product Type: Bed Frame Brackets
• Overall: 0.1'' H x 5'' W x 5'' L

Modi-Plate is designed to attach standard bolt-on brackets to odd-sized headboards. Includes 2 metal plates

• Product Type: Bed Frame Brackets
• Overall: 7'' H x 4.75'' W x 1.4'' L

This Bed Frame Bracket comes with two headboard/footboard brackets to allow headboard or footboard attachment to your frame. Customize your frame with these strong and easy to use brackets. Platform bed frame sold separately. Another comfort innovation. Pioneering comfort.

• Product Type: Bed Frame Brackets
• Overall: 10'' H x 5'' W x 5'' L

Adjust for Height of Headboard/Footboard: The #35 Down Hook Bolt-On Conversion Bracket for Headboard and Footboard attachment allows the consumer to make an adjustment for height. Thus, different size headboards and footboards can be accommodated. There is no provision for width adjustment with this bracket. Adjustment Range: Vertical: 2". Note on the Vertical Adjustment Range: The vertical adjustment dimensions are based on the bracket bolts being approximately 2-1/2" apart. Placing the bolts closer together would result in a greater vertical adjustment range, but could possibly decrease the strength of the connection. If a vertical height adjustment, within the specified range of 2" is needed, then our #35 would be the correct choice. Hooks Are Pointed Down: The hooks on the #35 are pointed down. The #35 bracket should be used when the headboard and/or footboard can support the weight of the bed. What's Included: The #35 Hook Plate Conversion Adapter Kit for Using a Bolt-On Frame with a Hook-On Headboard comes as a pack of 4. So, if you have a headboard and footboard to mount, you will only need one set. The #35 conversion bracket comes with 4 #35 brackets, nuts, and bolts. Please inquire should you have any questions.

• Product Type: Bed Frame Brackets
• Overall: 1.25'' H x 2'' W x 6'' L
• Weight Capacity: 800lb.

Excellent. Slipped in easily. Very strong and stay flush.. April. Glendale, CA. 2023-03-22 20:51:45

Anchor your mattress in your master suite or guest room with this low-profile bed frame. Crafted from heavy-duty steel in a powder-coated finish, this bed frame strikes a simple rectangular silhouette. A series of metal slats accommodate your memory foam, latex, or traditional spring mattress (sold separately), while short legs create just enough clearance for convenient under-bed storage. This frame is designed to easily attach to your own standard-sized headboard using predrilled holes in two of the legs.

• Product Type: Bed Frame
• Material: Steel
• Box Spring Required: Yes
• Clearance - Floor to Bottom: 5''
• Number of Bed Frame Legs Included: 6

A made-in-the-USA, heavy-duty bed frame that will fit full (double), queen, and king(eastern king) bedding. This is a headboard-only frame and will not accommodate a footboard. This frame requires the use of a foundation or box spring. This heavy-duty frame has six (6) legs that utilize our uniquely designed glides. The frame using these glides has been tested with a 2000-pound load. Guaranteeing the structural integrity of the part is perfectly consistent from one part to the next. The glides are stronger than a wheel while maintaining the same or better mobility. These glides are safe on all flooring surfaces. They will not mark or scuff a wood floor like wheels. The 2-inch wide center support on this frame is used head-to-toe on the king and full sizes. It can be used either head-to-toe or side-to-side on a queen size. This makes it perfect for split queen foundations. This frame sits approximately 7 1/2" off the floor. If no headboard is used, the headboard brackets can be left off and the bed centered on the frame, assuring that the frame cannot bump and damage the wall. All tools are included for a simple, quick, trouble-free assembly process. This frame uses our Instamatic assembly. This is a keyhole/riveted design that allows the frame to be set up and locked together without the use of tools and hardware. Headboard brackets are included and must be bolted onto the frame to ensure maximum adjustability to fit all designs of headboards. The headboard brackets are adjustable in both height and width and have 2 1/2" and 4"-hole centers. All hardware and tools required for mounting the frame to a headboard are included. The steel in this frame is a high strength, high carbon, hot-rolled steel. It is 100% average of 97% recycled material, which makes this frame a heavy-duty, environmentally friendly product.

• Adjustable to fit Full(double), Queen, and Standard King(Eastern King) Bedding
• The two-leg center bar for added support
• The diameter of the bottom of the 4 black glides the part that sits on the floor is 3
• Headboard only, will not work with a footboard.
• Maximum width for box springs - Full 53" - Queen 60" - King 76

Really Nice Bed Frame. My old bed frame had wheels and constantly moved. This is very sturdy and can not be moved easily. I love the feet that do not damage my tile floor. It was easy to put together, came on the day promised and looks just like the picture. I would recommend this bed frame. I am happy with the purchase.. Sandra. Ormond Beach, FL. 2023-03-03 07:55:08

This Hunnicutt Extension Bed Frame Bracket for a headboard-only style bed frame allows easy attachment of bolt-on footboard. Fits twin, full, queen, and king-size bed frames. Provides extra secure connections, reducing shifting and squeaking.

• Product Type: Bed Frame Brackets
• Overall: 4'' H x 2'' W x 16'' L