15 Ft. x 8 Ft. High-Density Polyethylene (Plastic) Steel Reinforced Outdoor Storage Shed

The shed arrived today. However the delivery company AMJ Campbell didn't follow the instructions to delo to the back door and when we talked to the delivery guy to wheel it in the back he was completely rude and dump the 3 large boxes in the front yard block the garage.

the shed almost collapsed this winter, yes we had snow, i live in Montreal, but this was unexpected. One of the steel "reinforced" supports bended and all the snow moved in that newly created "pocket" bending it further. Fortunately we saw it before something even worst happens, we run a small daycare and this was used for keeping the outdoor toys safely.

the colour was what it looked like, was a but difficult to put together, I haven't placed items in it yet but it does seem a bit cheaper than expected

[This review was collected as part of a promotion.] We bought this one year ago. Health issues prevented us from putting it up any sooner. My wife and I were finally able to assemble it. Assembly was a bit more complex than anticipated. We do not have a smart phone to use the scan things in the book. Videos on the computer were not really that helpful for what we needed to know while assembling it. Some did not seem to pertain to our model/product ID. We got it up. It looks good. We hope that it will last many years. We poured a slab of concrete for it to rest on.

[This review was collected as part of a promotion.] I bought in April, was delivered very quickly..3 days. I am a pretty skilled guy and it took me two full days with help on second day to final assemble. Shed is really nice, surprisingly very solid in trusses. Only issue i had was with a truss support on the Front Gable, the brace was too short, thus i made a new one. Was a little frustrating because I tried to help lifetime and e plain this piece was too short and got resistance. The brace was to tie 3 trusses together to support the gable, however it wasn't long enough to reach. It wouldn't even reach on the sidewalk where the trusses are located, so obviously not correct length. However, with custom piece I was able to build rest of shed, it looks really nice and I am very happy with it. I would highly recommend putting on concrete slab as I did. I would also recommend anchoring floor before you start to build, as this made it so much easier. The directions say to do it at the end. Another reommendation for the owners manual. The box content is located in the middle of the directions, this should be seperated or in the front of manual. I struggled to know what was in each box. If I knew this it would have been much easier to organize for sub assembly. I also found it easier to support walls with tent stake and string will assembling side walls as it was very windy and this was very helpful to prevent wind from damaging back wall.

[This review was collected as part of a promotion.] Really well made product! Went together with 3 people and 8 hours. Doors fit good and ample screws to do the job! Would recommend to anyone looking for a good shed!

[This review was collected as part of a promotion.] Just finished putting together my new lifetime shed. Product is high quality and didn't have any missing parts. Arrived ahead of schedule too! Putting this bad boy together is a commitment to say the least. It is definitely a two-person job as well even though the pre-assembly section of truss, gable, doors and walls can be done with only one person a second will speed it up a great deal. My only complaint is the door assembly process and alignment of the doors themselves. I needed to shim two of the doors to get them to close and now there is a gap between my wood base and the shed floor that might allow water to get under so I will probably apply some sort of foam sealer to help. If I didn't go 10 rounds with the doors I would give this product 5 starts.

[This review was collected as part of a promotion.] Unlike other reviewers here, I found the installation material easy to follow, because I followed BOTH the written instructions and Youtube videos during assembly. For each section of install, I would review the video, then followed the manual. It made sense when I used both, because there is detail information in both you can't get from using just one sources. In this manner I assembled the entire shed by myself in 12 hours, broken up into 2 days. First day (4hrs) I assembled all the doors, roof struts & misc parts. 2nd day for full assembly Tip: I used 2 cordless drills and belt holster to hold the drills and screws to speed up assembly because there are a lot of screws & bolts. The only issue I had was securing the 2 largest main roof struts by the front doors so they would not fall during assembly. If they fall and hit the floor, good chance of puncturing the plastic floor from the sharp metal edges. Tip 2: If installing by yourself, use duct tape to hold those struts in place until secured. Everything else was straight forward. Like others have said, a level platform is mandatory if you want panels and doors to line up. My site was a worst case scenario because my platform was built on 4x4 post stilts on a 45 degree slope. Though I was careful to make a level platform (using 6 foot level), I still had to do some shimming to get the doors fit perfect. But that is to be expected on a resin shed. Finally, if you get frustrated, I recommend take a break and review both the manual & video again. It's easy to miss things with so many parts involved.

Cheaply made. Horrible instructions. Never by another lifetime product again.

Excellent Shed. Looks Great, plenty of space and the 2 doors are awesome. It does take patients putting together, and prepping for the install is a must. Also make sure under a perfect weather day. It was fully installed in 8 hours with 3-4 hours of prep work and studying the manual. also the bilt app was very very helpful. FTY, Im a highly skilled DYIer, may be intimidating for the novice.